Marantz M-CR510 appendix 22Update on web screen, Click r from for the Web control function vpage

Contents Connections Playback Settings Tips Appendix

nn Network connection settings

Q0Various items will be displayed if you selected “Wi-Fi” in Example 1. Select or input items as necessary, and then click “Test Connection” to apply the changes.

•Items displayed may vary depending on selected items and connection status.

•After selecting each item, wait a moment for the display to be updated.

Q1Displayed if “DHCP” or “Proxy” is selected in Example 1. When

changing DHCP/proxy settings, input or select for each item.

%

•To apply network connection settings, click “Test Connection” after making changes.

22Update on web screen

Firmware can be updated using the “Web control function” (vpage 57).

“Web control function” (vpage 57) settings must be completed in advance on a PC belonging to the same network.

For information on obtaining update files, please contact our customer service center.

1 Click r from step 5 for the “Web control function” (vpage 57).

The PC will display the following screen. Wait for approximately 1 minute.

You can also gain access by entering the IP address shown by the unit into a web browser.

GThe web displayH

FIRMWARE

Please wait...

Now,go to the new IP displayed in the body.

If do not move the page within 1 minute,please refer to IP.

GThe unit’s displayH

			60
Front panel	Rear panel	Remote		Index