Marantz Model SC-11S1 manual Names And Functions Of Parts, Front Panel, 1!0o, u yt, q w e

ENGLISH

NAMES AND FUNCTIONS OF PARTS

FRONT PANEL

!1!0o i u yt

	DISPLAY	ATT.
		PHONO
	TONE	MC
		OPERATE
		POWER ON/OFF
	PHONES	PHONES
INPUT SELECTOR	OUT	PRE OUT	VOLUME

!2!3

qPOWER ON/OFF Switch

This switch turns power to the unit ON and OFF. When pressed, power is activated and the blue indicator in the display w lights up. Pressing the switch again turns the power OFF.

wDisplay

Indicate the selected input source, volume level, and setting status.

q w e r

uATT. Button

This button attenuates the volume with one press of the button. For instructions on How to Set the Attenuation Level, see page. 21.

iIllumination Lamp

The illumination lamp casts a blue light over the switches and buttons. It can be turned ON and OFF with the DISPLAY button. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 24.

eInfrared Receptor Window

This receptor window receives control signals sent from the included remote controller.

rVOLUME Knob

This knob is for setting the volume. The volume level is displayed on the display w. When turned slowly, the volume can be fine-adjusted in 0.5dB steps, whereas when turned rapidly, the volume level changes greatly.

tPRE OUT Button

This buttons turns output from the PRE OUT jack and BALANCED PREOUT jack on the rear panel ON and OFF. When using just the headphones, switch this button OFF.

oDISPLAY Button

This button turns the display and side illumination ON and OFF. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 24.

!0TONE Button

This button turns the bass and treble tone control ON and OFF. For instructions on How to Trim Bass and Treble, see page. 23. If pressed and held for 2 seconds or longer, this button switches the subsonic filter ON/OFF. For details on SUBSONIC FILTER, see page 21.

!1PHONES OUT Button

This button switches the headphone jack output signal ON/OFF. Set this to OFF when not in use.

yPHONO MC Button

This button switches the Phono equalizer amplifier setting between MC and MM. Set the phono equalizer amplifi er according to the type of cartridge you use.

!2INPUT SELECTOR Knob

This knob is for selecting the input source to use in playback and recording. The selected input source is displayed in the display w.

!3PHONES Jack

This jack is for connecting headphones with a standard stereo plug.

6