Marantz Model SC-11S1 manual HOW to SET ID Numbers, Input Selector Power ON/OFF Switch Knob

HOW TO USE AND SET FEATURES

HOW TO SET ID NUMBERS

If using this unit by itself as a stereo amplifier, set the ID number to “0” (Default setting is “0”).

Note:

If the ID number is set to a number other than “0”, this unit cannot be used for standalone operation.

The ID number of the unit appears on the display for about 3 seconds after the power is activated.

When multiple SC-11S1s are connected, a unique ID number must be set of each one in order to distinguish between them.

The unit that centrally controls the other units takes ID 1. The unit with ID1 is called the “Master”. The other units that synchronize with the master are called “slaves” and take IDs “2” ~ “4”.

ENGLISH

DISPLAY button

	DISPLAY	ATT.
		PHONO
	TONE	MC
		POWER ON/OFF
INPUT SELECTOR	PHONES	PHONES	VOLUME
	OUT	PRE OUT

INPUT SELECTOR POWER ON/OFF Switch Knob

Set ID numbers as follows.

1.While pressing and holding the DISPLAY button, press the POWER ON/OFF switch.

2.Turn the INPUT SELECTOR knob to the desired ID number.

After finishing setting the ID number, turn power to the unit OFF.

The setting is stored in memory and becomes active the next time power to the unit is switched ON.

27