Marantz PM7200 manual Tape Deck Cd-Rmdoperation, English, Français, Dansk, Deutsch, deck

ENGLISH	TAPE DECK CD-R(MD) OPERATION
		INTEGRATED AMPLIFIER PM7200
		INPUT SELECTOR						VOLUME
		TAPE	PHONO	CD	TUNER AUX1	AUX2	CD-R/MD
		TAPE			MUTE		CD-R/MD
FRANÇAIS							MIN	MAX
		REC SELECTOR			BASS		TREBLE	BALANCE
		OFF
		POWER ON/OFF PHONES STANDBY1 SPEAKERS 2 SOURCE	TAPE CD-R				CLASS A SOURCE DIRECT
			CD-R TAPE
			COPY
		ON OFF		-	+	-	+ ON OFFON OFF	LR
		Perform the applicable operation on the connected tape
DEUTSCH		deck.
	2.	Play a tape on the tape deck.
	TO PLAY BACK FROM A TAPE
	1.	Press TAPE A to the indicator above the switch is lit.
	3.	Use VOLUME B to adjust volume.
NEDERLANDS	4.	Use BASS and TREBLE D to adjust the tone.
	NOTE:
	You can play back from a tape regardless of the INPUT SELEC-
	TOR C setting.
	TO RECORD TO A TAPE
	1.	Set INPUT SELECTOR C to PHONO, CD, TUNER, AUX 1, or
		AUX 2 to select the source you want to record from.
	2.	Use the REC SELECTOR E to specify the type of recording
ESPAÑOL		you want to perform.
	3.	Start play on the selected source.
	4.	Perform the applicable operation on the connected tape deck
		to record the output from the selected source.

NOTE:

The SOURCE DIRECT switch must be turned off (raised) in order to record to a tape deck. Recording will not possible when SOURCE DIRECT is turned on (depressed).

SVENSKA PORTUGUÊS ITALIANO

DANSK

USING THE REC SELECTOR

Use the REC SELECTOR E to specify the type of recording you want to perform.

1.The OFF setting cuts off all signal output from the REC OUT jacks. Note that REC SELECTOR Eshould normally be in the OFF setting except when you are recording to tape. The OFF setting shortens the signal path within the amplifier, which minimizes crosstalk and other factors that can cause deteriora- tion of the sound.

2.SOURCE sets up for recording the signal from the source se- lected by INPUT SELECTOR C.

3.COPY sets up for recording from TAPE to CD-R, or from CD-Rto TAPE. You can listen to the output from another source while recording in the COPY position by selecting the source you want with INPUT SELECTOR C.

6