SETTING UP
AC Adaptor and Batteries
AC Adaptor
When recording for extended periods, or using this unit in a fixed environment, it is recommended to supply power to the unit via the included AC adaptor.
to AC outlet
Note
•It is recommended to only use the Marantz Professional brand AC adaptor (model DA600) for use with the PMD690.
Alkaline Batteries
The PMD690 can operate using 8 standard AA size alkaline batteries.
First load the batteries into the battery holder and then load the holder as shown in the following illustration.
Battery Replacement
When the battery alert indicator ( ) appears steadily in the display, replace all batteries with new ones. For the complete description of the battery alert indiactor, please refer to page 12.
Fresh alkaline batteries will provide
Different brands of alkaline batteries provide very different levels of performance in the PMD690. For a list of the best performing alkaline batteries please see the
Marantz Professional website at www.marantz.com.
Notes
•When recording, to avoid problems caused by loss of battery power, it is recommended to always use new alkaline batteries.
•Use only AA size batteries for replacement.
•Be sure to insert the batteries with correct polarity (as illustrated on the battery holder).
•Remove the batteries if the unit will not be used for an extended period of time.
•Battery life may vary depending on the conditions under which the unit is operated (environmental temperature, humidity, speaker usage, etc.).
•If batteries leak, dispose of them immediately. Avoid touching the leaking material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
•For optimum life and accurate battery display, make sure the battery ("bat") preset is set to "al". See page 9 for more information on the preset menu.
Ni-Cad Rechargeable Battery (optional)
An optional
Refer to the following illustration to load the battery.
Battery Replacement
When the battery alert indicator ( ) appears steadily in the display, charge the battery or replace the rechargeable battery with a fully charged one.
A fully charged battery should provide
Charging Battery
The optional
•The AC adaptor is connected
•The
•The CHARGE slide switch is set to ON
•The power to the unit is off
While charging, the CHARGE LED will blink.
When the charge cycle is complete, the CHARGE LED will stay steadily on.
Notes
• The battery will not charge when the power to the unit is on.
Charging Time
Approximately 3 hours.
Notes
•Make sure to fully charge the battery before first use.
•Battery life may vary depending on the conditions under which the unit is operated (environmental temperature, humidity, speaker usage, etc.).
•It is recommended to only use the Marantz Professional brand AC adaptor (model DA600) for use with the PMD690.
•For optimum life and accurate battery display, make sure the battery ("bat") preset is set to "nc". See page 9 for more information on the preset menu.
•When recording, to avoid problems caused by loss of battery power, it is recommended to always use a fully charged battery.
•Remove the battery if the unit will not be used for an extended period of time.
•If the charge LED does not blink when charging should be taking place, remove and then restore power.
•The battery power should be completely used before it is re- charged because
ENGLISH
3