SOUND MENU CONTROLS (CONTINUED)
TV SPEAKERS
Would you like to hear TV programs through your audio
BEGIN
Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks on the TV to the R and L Audio Input jacks on your amplifier or sound system.
SOUND MENU |
|
TV SPEAKERS | STEREO |
DISPLAY VOLUME
SECOND AUDIO PROGRAM
EXIT
TV SPEAKERS
2 O
NORMAL
TV SPEAKERS OFF
EXIT
1
VARIABLE
AUDIO
OUTPUT JACKS
BACK OF TV
Set the audio system's volume to normal listening level.
Turn the TV and audio system ON. You can now adjust the sound level coming from the audio system with the Volume ▲▼ buttons on the TV or remote.
To hear the TV sound from only the audio system speakers, select TV SPEAKERS control.
With SOUND MENU (2 of 3) on screen, move the RED highlight
with the outer OK arrow buttons. Then press the center OK button to select the feature.
Press the OK arrow and
center OK buttons to highlight and turn OFF (✔) the TV SPEAKERS control.
You should now only hear TV sound coming from the audio system speakers.
|
| POWER |
|
|
|
|
| SOURCE |
|
|
|
| ON | ON/OFF | OFF |
| |
|
| CLONE MACRO MODE |
| ||
MACRO |
|
|
| MACRO | 5 |
| LEARNING REMOTE CONTROL | ||||
1 |
| RC - 18SR |
| 3 | |
DN |
|
| |||
2 |
|
|
| 4 |
|
D1 |
|
| D5 |
| |
D2 |
|
| D6 |
| |
D3 |
|
| D7 |
| |
D4 |
|
| D8 |
| |
DSS/ | TV | LD | DVD | VCR1 |
|
VCR2 |
| ||||
TUNER | CD | TAPE | AUX |
| |
/MD |
| ||||
| 4 |
|
| VOL |
|
| 3 |
|
|
| |
POSITION | PIP |
|
|
| |
1 | 2 | 3 |
|
|
|
4 | 5 | 6 |
| OK |
|
|
|
| |||
7 | 8 | 9 |
|
|
|
|
|
| AMP | GUIDE MUTE |
|
M | 0 | C |
|
|
|
|
|
|
|
| 3 |
4
AUDIO IN
(RED/WHITE)
R | L |
AUX/TV INPUT | |
PHONO INPUT | |
AUDIO SYSTEM
2 
Note: Audio Menu controls can be set separately dependent upon the current TV operating mode (NTSC/ANTENNA, AUX 4, AUX 5, etc.). For instance, the TV Speaker On/Off control can be set to “OFF” for normal NTSC TV viewing playback operation; while the same TV Speaker Audio control can also be set to “ON” in a AUX 4 or AUX 5 Input Source mode.
Press the STATUS button to
clear the screen.
SMART HELP
Remember, the audio 
system may have to be in
AUX(iliary) mode to play sound
FIXED
VIDEO OUT
VAR
PIP |
RL
NOTE: The TV’s FIXED AUDIO OUTPUT jacks can also be used for the playback of TV program sound with an external audio amplifier, or home theater
to the Variable Audio Outputs (as shown above). However, specific sound level adjustments will be made with the controls at the external amplifier or home sound system (instead of through the TV’s audio level controls.)
from the TV (Outputs).
Note: When the TV SPEAKER control is set to "NORMAL" (for TV speaker operation) make sure the VARIABLE AUDIO OUTPUT control (see next page) is also set to "STEREO" in order for the TV's AUDIO OUTPUT jacks to work properly.
AUDIO OUT
ANT A/CABLE 75 V UHF/VHF
NOTE: The TV’s PIP |
| the ANT A and ANT B Input |
| ||
AUDIO OUTPUT jacks can |
| sources are connected for |
also be used for additional |
| use), the PIP AUDIO |
stereo playback options such |
| OUTPUTs will switch from |
as wireless transmitter |
| stereo to monaural (mono) |
headphone |
| sound. Stereo sound will only |
external amplifier connection |
| be available with the TV’s |
source. However, with normal |
| Main screen (or ANT A |
PIP feature operations (when |
| supplied signal) at that time. |
| ||
|
|
|
30
