Setting Up Your RC3200
Third Setup Page
RC3200 Information
This page contains information that may be important to the dealer in case of a defect. The following information is displayed on this screen:
•Free memory (in percentage), which gives you an indication on how much memory is left to (further) customize the RC3200;
•Boot version;
•Application version;
•Configuration file;
•The Revert button.
The Revert Button
Warning When you revert the RC3200, all customization is lost perma- nently. You loose all RC3200 settings, learned codes and recorded macros.
By tapping the Revert button the RC3200 will be reverted to the default configuration. Reverting to the original configuration restores the RC3200 to its initial state. You might have to revert when you notice that scrolling through pages is slowing down. This might be the case when you have added a lot of commands to the RC3200.
1Tap the Revert button.
A message screen appears to confirm or cancel the revert pro- cess.
2Press OK or Cancel.
To Exit Setup Mode
1Press the Mode button. The Mode screen appears.
2Tap the mode button you want to go to.
RC3200 switches to this mode. See also ‘Working with Modes’ on p. 10.
Learning Commands
User Guide |
14
