JPEG Files
Displaying JPEG files
1.Open the disc tray.
2.Place the disc with the printed side facing up and close the disc tray.
EN | The folders on the disc will be listed in |
| numerical order on the left side of the |
| screen. When you highlight a folder, the |
| list of pictures in the folder are listed in |
| numerical order on the right side of the |
| screen. |
3.Select a folder using the up/down arrow buttons on the remote, then press the left arrow button to move to the picture icons at the bottom of the screen. Use the left/right arrow buttons to select picture mode.
4.Press the up arrow button to move to the file list on the right side of the screen. Use the up/down arrow buttons to select a file. Press OK to open a file or press PLAY to start a slide show.
5.The unit starts the slide show with the JPEG file you have selected, then displays all the JPEG files in the same folder, then all the JPEG files in the subfolders located in the same folder. You can set the amount of time a picture remains on the screen in the General Setup menu.
6.During the slide show you can use the left/ right button to rotate the picture, the up arrow button to rotate the image vertically, the down arrow button to rotate the image horizontally. Use the ZOOM button to magnify the picture. Use the CH- button to go back to the previous picture or the
CH+ button to go to the next one, and the
STOP button to interrupt the slide show and display the disc’s contents.
7.Press INFO to display the Info menu during playback.
8.When the unit has played all the files, the slide show stops and the disc’s contents are displayed again.
9.Press STOP to end playback.
•The time taken for the contents of the disc to be displayed varies according to the size and number of JPEG files on the disc. If nothing is displayed after a few minutes, the file sizes may be too large. Reduce the files resolution and write another disc.
•Before inserting a disc, make sure it is compatible with the unit.
Radio
The unit has a
Manual tuning
1.Connect the FM antenna and the AM loop antenna at the back of the unit. Rotate the AM loop for better reception.
2.Press TUNER.
3.Tune a station by pressing TUNER+/- repeatedly until the desired station is found. Alternatively, you can press and hold the same buttons down for about one second to activate the automatic search function. In this mode the unit will automatically tune frequencies until it finds a station.
4.Repeat step 3 to tune to another radio station.
5.Press TUNER to toggle between FM and AM.
Storing radio stations
The unit can store up to 30 radio stations in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order.
Automatic preset programming
all 30 memory locations are full, the auto preset programming function will stop.
Manual preset
1. Tune to a radio station (see “Manual | EN |
tuning” for details). |
2.Press MEMORY. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons or press the CH+/- buttons, then press
MEMORY to store it.
Retrieving preset stations
1.Press TUNER to enter the Tuner mode.
2.Press CH +/- to search up or down for the preset stations or directly press the numeric buttons.
Tips:
• When the FM station broadcasts Stereo sound is found, ST is displayed.
• When you manually tune into a weak FM |
station, press AUDIO on remote control |
to switch from Stereo to Mono mode. |
This will reduce the background noise. |
• If there is any interference, change the |
antenna’s position until ideal sound |
reception is obtained. TV and other |
electronic devices could be the cause |
Aux-in
TV, VCR or Set Top Box can be connected to
Selecting Aux-In mode
1.Press TUNER to enter the Tuner mode and select FM.
2.Press and hold TUNER for a few seconds to start automatic preset programming.
3.Radio frequencies will be browsed and radio stations stored automatically. When all the available radio stations are stored or
of interference, so try to position the |
antenna away from them. |
• A weak signal can affect the “Automatic |
preset programming” function’s |
efficiency. Adjust the antenna for better |
reception and a more efficient search. |
AUX input jacks (at front panel and at the rear panel) of the unit so that sound from the auxiliary component comes into the unit and out through the speakers.
Connecting auxiliary components
Refer to “Connecting to external audio sources
Press either SOURCE on the main unit or AUX1/2 on the remote control to select AUX 1 or AUX 2 mode.
Sound output in Aux-In mode
•You may toggle between Dolby Virtual
Speaker mode and stereo mode by pressing
“” button on the remote.
•Refer details on Dolby Digital and Dolby
Virtual Speaker.
The Setup Menu
There are four options in the main setup menu: General Setup, Language Setup, Audio Setup and Video Setup.
Press SETUP to bring up the main menu. Select |
one of the menu icons across the top of the |
screen using the left/right arrow buttons. The |
menu’s options are displayed on the left side |
of the screen. Press the Up, Down, Left and |
Right arrow button to move to the option’s |
choices on the right. Press SETUP if you want |
12
to exit setup. | 13 |