AutoDome 600 Series Analog PTZ Camera Pelco On-Screen Menus | en 37
Bosch Security Systems, Inc. User Manual F.01U.270.005 | 2.0 | 2012.06
5.1.1 Command Lock (locked)The Pelco Command Lock Menu allows or prohibits the use of locked commands. The default
setting is ON.
5.1.2 Bosch Menu (locked)The Bosch Menu allows full access to the AutoDome main Setup Menu and all AutoDome
configuration settings.
Refer to Section 2: On-Screen Display Menu Navigation for a complete description of Bosch
menus and configuration settings.
Software Version Displays the current software versions.
Ack and Reset Alarms Acknowledges and resets active alarms.
Restore All Settings
(locked)
Restores all settings to their original default setting.
Reset All Memory
(locked)
Clears all settings, including scene shots, tours, and recordings
stored in the AutoDome memory.
Menu Description
Exit Exits the menu.
NOTICE!
After a period of 4.5 minutes of inactivity, the OSD menu times-out and exits without warning.
Some unsaved settings can be lost!
NOTICE!
If the Command Lock is set to ON and you press Focus or Iris on a locked command, the
AutoDome displays the on-screen message: “Command is Locked.”
Pelco menu Bosch menu
Setup Menu Setup Menu
Exit...
Command Lock: OFF Exit...
Bosch Menu Camera Setup
Camera Setup Lens Setup
PTZ Setup PTZ Setup
Edit Password Display Setup
*FastAddress: Not Set Communication Setup
Advanced Alarm Setup
Software Version Language
Ack and Reset Alarms Advanced
Restore All Settings Diagnostics
Reset All Memory
* = Factory Setting
Focus / Iris: Select Focus / Iris: Select