Bosch Appliances VG5 600 user manual FastAddress

AutoDome 600 Series Analog PTZ Camera Alternative Control Protocols en 31

NOTICE!

If the user does not enter the exact manufacturer Unique Identifer as displayed on-screen, the FastAddress can not be set and the only option available is to Exit the menu.

4.Move the joystick right to highlight Continue. Then, press the FOCUS or the IRIS button.

Enter FastAddress

FastAddress:	Not Set
Unique Identifier:	200668
200668
r
Continue...
Exit...

Joystick: Match Identifier

5.The AutoDome automatically reads the correct Address sent by the controller and is displayed as Save ## as FastAddress (## is based on either 1-64 AD/Manchester or 1-99 AD/Sensormatic RS-422). It is NOT POSSIBLE to change the address that is displayed. The following options are available:

–Press the FOCUS or the IRIS button to store the FastAddress number.

–Move the joystick to highlight Clear Current FastAddress and then press the FOCUS or the IRIS button to clear any currently saved Fast Address.

–Move the joystick to highlight Exit Without Change to exit the FastAddress menu without saving any changes.

FastAddress

FastAddress: Not Set

Save “##” as FastAddress

Clear Current FastAddress

Exit Without Change

Focus/Iris: Select

Bosch Security Systems, Inc. User Manual F.01U.270.005 2.0 2012.06