Bosch Appliances VG5 600 user manual Common AutoDome User Commands unlocked, Setting AutoPan Mode

26 en Common AutoDome User Commands (unlocked)AutoDome 600 Series Analog PTZ Camera

3	Common AutoDome User Commands (unlocked)
	This chapter details the commonly used Bosch keyboard setup commands. See
	Section 6 Keyboard Commands by Number, Page 41, for a complete list of commands.
3.1	Setting AutoPan Mode
	AutoPan mode pans the AutoDome camera 360º or pans between user defined limits (when
	programmed). The AutoDome camera continues to pan until stopped by moving the joystick.

To pan 360º:

1.Press ON-1-ENTER.

2.Move the joystick to stop the pan.

To set left and right pan limits:

1.Move the camera to the starting position and press SET-101-ENTERto set the left limit.

2.Move the camera to the end position and press SET-102-ENTERto set the right limit.

To start AutoPan between limits: 1. Press ON-2-ENTER.

2. Move the joystick to stop the pan.

3.2Setting Preset Shots

Preset shots are saved camera positions. Shots are saved as scenes, therefore, the terms SHOT and SCENE are used interchangeably.

To set a Shot:

1.Move the camera to the position you want to save.

2.Press SET-#-ENTERwhere # can be a number from 1 to 99 that identifies the camera position of the scene.

3.To specify a title for the shot, see the procedure below.

To view a Shot:

Press SHOT-#-ENTERwhere # is the number of the scene position you want to view.

To store or clear a Shot:

1.Press SET-100-ENTER to access the Store/Clear Scene Menu.

2.Follow the on-screen instructions.

To disable overwrite confirmations:

If you overwrite a preset shot the AutoDome issues a confirmation message prompting you approve the overwrite. To disable this confirmation message issue the OFF-89-ENTERcommand.

F.01U.270.005 2.0 2012.06 User Manual Bosch Security Systems, Inc.