50 en | Advanced Features AutoDome 600 Series Analog PTZ Camera
F.01U.270.005 | 2.0 | 2012.06 User Manual Bosch Security Systems, Inc.
Setting AutoTrack Optimization Parameters
1. Press OFF-90-ENTER to turn off the command lock.?
2. Press ON-46-ENTER to access the Main Menu.?
3. Use the joystick to highlight the Advanced menu.?
4. Select the AutoTrack Sensitivity option and change the parameter to Auto or to a value
between 1–10.?
5. Exit the AutoTrack Sensitivity menu. Then, exit the Advanced Feature Setup menu.
6. Access the PTZ Setup menu.
7. Select the AutoPan option and change the parameter to one of the suggested values in
the table above.
8. Exit the AutoPan menu. Then, exit the PTZ Setup menu and finally exit the Main menu.
Consistent Light Conditions
You may use higher AutoPan speeds in consistent indoor or outdoor ambient light conditions,
but Bosch recommends not exceeding a speed of more than 15 degrees/sec. Then modify the
AutoTrack Sensitivity setting to reach the optimal results.
7.3 Virtual Masking
Virtual Masking is a unique Bosch technology that allows you to create an “invisible” area that
ignores unwanted background motion. These invisible masks are similar to privacy zones,
except that the AutoDome AutoTrack and Motion Detection algorithms can see them.
– To configure a Virtual Mask, open the Main menu, select the Advanced menu, then select
Virtual Masking. To setup a Virtual Mask follow the on-screen menu instructions.
– In Pelco Mode, open the Main menu, select the Advanced menu, then select Virtual
Masking. To setup a Virtual Mask follow the on-screen menu instructions.
7.4 Privacy Masking
Privacy Masking is used to block out a specific area of a scene from being viewed. Mask
choices include black, white, or blurred, and can be configured with three, four, or five
corners to cover more complex shapes.
– To configure a Privacy Mask, open the Main menu, select Display Setup, and then select
Privacy Mask. Alternatively, enter the keyboard command ON-87-ENTER. To setup a
privacy mask, follow the on-screen menu instructions.
–In Pelco Mode open the Pelco Main menu, open the Bosch menu, select the Display
Setup menu, and finally select Privacy Masking. To setup a privacy mask, follow the on-
screen menu instructions.
NOTICE!
Draw the mask 10% larger than the object to ensure that the mask completely covers the
object as the AutoDome zooms in and out.
NOTICE!
Privacy Masking does not hinder AutoTrack from tracking an object.
NOTICE!
Draw the mask 10% larger than the object to ensure that the mask completely covers the
object as the AutoDome zooms in and out.