Bosch Appliances VG5 600 user manual Refer to .8 Azimuth, Elevation, Compass Directions

42 en Keyboard Commands by Number				AutoDome 600 Series Analog PTZ Camera
Locked	Function	Comm	Command	Description
	Key	No.
	On/Off	95	Display Azimuth/Elevation	On–Displays azimuth/elevation readings
			Readings	Off–Hides azimuth/elevation readings
				Refer to Section 7.8 Azimuth, Elevation, and
				Compass Directions, page 52.
	On/Off	96	Display Compass Readings	On–Displays compass heading
				Off–Hides compass heading
				Refer to Section 7.8 Azimuth, Elevation, and
				Compass Directions, page 52.
	On	99	Factory P/T Home Position	Recalibrates home position; can be used as an
				Alarm Output
	On/Off	100	Record A	Activate/Deactivate
	On/Off	101	Record B	Activate/Deactivate
	On	997	FastAddress, display	Display current address
	On	998	FastAddress, all units	Display and program current address
	On	999	FastAddress, unaddressed domes	Display and program unaddressed AutoDomes
	Set	“1-99”	Pre-position Programming	Set ##–Programs a preset view
	Shot	“1-99”	Pre-position Recall	Shot ##–Recall programmed preset
	Set	100	Pre-position Menu	Enters the Pre-position menu
	Set/Shot	101	Autopan Left Limit	Set–Programs left limit
				Shot–Shows limit
	Set/Shot	102	Autopan Right Limit	Set–Programs right limit
				Shot–Shows limit
	Set	110	Factory P/T Home Position	Set–Recalibrate home position
	On/Off	680	Homing Recalibration Display	Displays the current mode of operation,
				intervals, time until the next calibration, and the
				number of recalibrations that have occurred.
				On – Turns display on.
				Off – Turns off the display.
	On/Off	681	Homing Recalibration	On – Enables recalibration (This action does not
				cause the dome to re-home immediately)
				Off – Disables recalibration
	On	682	Recalibration Mode	Each On command toggles the recalibration
				mode as follows:
				– Recalibrates only on the loss of home
				position.
				– Recalibrates on the loss of home and for
				every periodic interval.
	On/Off	683	Recalibration Interval	Changes the homing recalibration interval.
				Intervals are in 6-hour increments up to 72
				hours.
				Each On – increases interval by 6 hours
				Each Off – decreases interval by 6 hours

F.01U.270.005 2.0 2012.06 User Manual Bosch Security Systems, Inc.