AutoDome 600 Series Analog PTZ CameraPelco On-Screen Menus en 39

PTZ Setup Menu Choices:

 

 

 

 

 

 

Menu

Description

Sub-menu / Description

Default

 

 

 

Setting

 

 

 

 

Exit

Exits the menu.?

 

 

 

 

 

 

Edit Tour 1

Accesses the Add /

Exit: Exits the menu.

 

 

Remove Scenes On

Scene (1 - 5): Adds or removes

 

 

Standard Tour 1 Menu.

scenes from the Standard Tour.

 

 

 

 

 

Edit Tour 2

Accesses the Edit Custom

Exit: Exits the menu.

 

 

Tour Menu.

Scene (1 - 5): Adds or removes

 

 

 

scenes from the Custom Tour.

 

 

 

 

 

Tour 1 Period

Changes the length of

Sliding scale: – (3 sec. to 10 min.) +

5 sec.

 

waiting time between

 

 

 

presets.

 

 

 

 

 

 

Tour 2 Period

Changes the length of

Sliding scale: – (3 sec. to 10 min.) +

5 sec.

 

waiting time between

 

 

 

presets.

 

 

 

 

 

 

Scan Speed

Changes the Autopan and

Sliding scale: – (1°/sec to 60°/sec)

30°/

 

AutoScan speeds.

+

sec.

 

 

 

 

Edit Presets

Modifies preset scenes.

1-99 scenes

 

 

 

 

 

Limit Stops

Toggles the Limit Stops for

ON or OFF

OFF

 

AutoScan.

 

 

 

 

 

 

Recordings

Selects record Pattern 1 or

A” or “B

“A”

 

2, if normal pattern

 

 

 

command does not

 

 

 

respond.

 

 

 

 

 

 

AutoPivot

Follows a subject while

ON or OFF

ON

 

beneath the camera,

 

 

 

without inverting the

 

 

 

picture.

 

 

 

 

 

 

5.1.4

Other Menus

 

 

 

 

 

 

 

 

 

Menu

Description

Default

 

 

 

 

Setting

 

 

 

 

 

 

 

Edit Password

Sets or displays the password. See Section 1.4 Setting

 

 

 

 

Passwords, page 8.

 

 

 

 

 

 

 

 

FastAddress (locked)

Sets or changes the AutoDome address.

Not Set

 

 

 

 

 

 

 

Software Version

Displays the camera software version.

 

 

 

(unlocked)

 

 

 

 

 

 

 

 

 

Ack and Reset Alarms

Acknowledges and resets alarms. If there is no active

 

 

 

 

alarm input, the OSD displays the following message:

 

 

 

 

No Active Alarms.

 

 

 

 

 

 

 

 

Restore All Settings

Restores all settings to their original factory default

 

 

 

(locked)

settings.

 

 

 

 

 

 

 

 

Reset All Memory

Restores all settings to their original factory default

 

 

 

(locked)

settings and clears all user programmed settings such

 

 

 

 

as preset scenes and recordings.

 

 

 

 

 

 

Bosch Security Systems, Inc.

User Manual

F.01U.270.005 2.0 2012.06

Page 39
Image 39
Bosch Appliances VG5 600 user manual Other Menus