Bosch Appliances VG5 600 user manual Alarm I/O Setup Inputs Setup, None

18 en On-Screen Display Menu NavigationAutoDome 600 Series Analog PTZ Camera

2.7	Alarm I/O Setup
		The Alarm Setup Menu provides access to the Alarm I/O Setup Menu to establish the alarm
		inputs and outputs and to configure alarm rules.
		Alarm I/O Setup		Inputs Setup
		Exit...	Exit...
		Inputs Setup...	1. Alarm Input 1		N.C.S.
		Outputs Setup...	2. Alarm Input 2		N.O.S.	Physical
		Rule Setup...	3. Alarm Input 3		N.O.	Input 1-7
		Restore Defaults...	4. Alarm Input 4		N.C.
			5. Alarm Input 5		N.O.
			6. Alarm Input 6		N.C.
			7. Alarm Input 7		N.O.
			8. NONE
			9. NONE
			10. NONE			Physical
			11. NONE			Output 9-12
			12. NONE
				Focus / Iris: Select Type
		Focus / Iris: Select		Right / Left: Select Mode
		Alarm Setup Menu Choices:
Menu	Description			Sub-menu / Description			Default
							Setting
Exit	Saves and exits the menu.
Inputs Setup	Defines physical inputs or events and
	commands that can be used in a rule.
	There are twelve (12) alarm inputs
	available.
Inputs 1-7	Defines the type of physical input.			N.O.: Normally open dry contact.			N.O.
				N.C.: Normally closed dry contact.
				N.C.S.: Normally closed supervised contact.
				N.O.S.: Normally open supervised contact.
Inputs 8-12	Defines input commands that can be			NONE: No command defined.			NONE
	used in a rule. Command inputs can also			Aux On: Responds to a standard or custom
	be customized by using non-assigned			keyboard ON (1-99) command.
	keyboard command numbers.			Aux Off: Responds to a standard or custom
				keyboard OFF (1-99) command.
				Shot: Responds to a Preset shot or scene from
				1-99.
				AutoTrack: Triggers an alarm when set to ON.
				Motion Detection: Triggers an alarm when set
				to ON.

NOTICE!

Alarm inputs 1 and 2 provide tamper detection, if programmed as supervised, for breaks or shorts in an alarm circuit. See the VG5 AutoDome Installation Manual for wiring instructions.

F.01U.270.005 2.0 2012.06 User Manual Bosch Security Systems, Inc.