Bosch Appliances VG5 600 Motion Detection with Region of Interest, Preset positions 90 through

AutoDome 600 Series Analog PTZ CameraAdvanced Features en 51

7.5	Motion Detection with Region of Interest
	(Preset positions 90 through 99)

With the VG5 Series AutoDome, the motion detection software can be configured to create a Region of Interest within multiple preset positions or scenes. It can take advantage of Virtual Masking to ignore motion in predefined areas. Motion Detection can also be used as an Alarm Rule input.

Preset positions 90 through 99 are reserved for programming motion detection scenes.

NOTICE!

Motion Detection always takes precedence over AutoTrack object tracking.

To set up a scene with Motion Detection:

1.Choose an unused Preset position from 90 to 99. For this example use Preset scene 95.

2.Enter the keyboard command SET-95-ENTER.

3.Select YES at the Apply Motion Detection? prompt. (If NO is selected, the Preset scene does not activate Motion Detection.)

4.Select YES at the Apply Region of Interest? prompt. (If NO is selected, the entire scene is used for Motion Detection.)

5.Follow the on-screen menu instructions to construct the shape of the screen area you want to detect motion within.

NOTICE! Up to five (5) anchor points can be used to form the area which you want to detect motion within. Motion Detection is not activated until the Preset scene is recalled. The Motion Detection icon "M" appears in the upper left-hand corner of the display.

7.6 Image Stabilization

Image Stabilization becomes increasingly important as zoom ranges are extended. The advanced image stabilization algorithms of the VG5 Series AutoDome eliminate camera shake for exceptional image clarity. Bosch achieves this clarity without reducing camera sensitivity or picture quality.

–To configure image stabilization, open the Main menu, select the Advanced menu, and then select Stabilization to turn on the feature.

–In Pelco Mode open the Main menu, select the Advanced menu, and then select Stabilization to turn on the feature.

7.7Pre-position Tour

The VG5 Series AutoDome features (2) preset tours. Each preset scene is saved for playback later.

Tour 1 is a standard tour that only recalls the scenes in the exact sequence they were shot. Scenes can be added or deleted on the tour, but the sequence cannot be changed. To add or remove scenes on Tour 1 enter the keyboard command SHOT-900-ENTERand follow the on- screen instructions.

Tour 2 is a customizable tour that allows you to rearrange the sequence of scenes on the tour by inserting and deleting scenes. To enter the Edit Tour 2 menu, enter the keyboard command SET-900-ENTERand follow the on-screen instructions.

Bosch Security Systems, Inc. User Manual F.01U.270.005 2.0 2012.06