Troubleshooting (Continued)
RecordingPlayback
Other Problems
Trouble | Action | |
Recording cannot be | • SD Card or | |
performed. | replace the SD Card. | |
| • Insert a commercially available SD card, and set each of the [REC | |
Recording stops by | MEDIA FOR VIDEO] to [SD Card] and [REC MEDIA FOR IMAGE] | |
to [SD]. | ||
itself. | ||
• Recording stops automatically after 12 hours of continuous | ||
| ||
| recording. | |
Sound or video are | • Sometimes playback is interrupted at the connecting section | |
interrupted. | between two scenes. This is not a malfunction. | |
| • Select [PLAYBACK MPG FILE] then search the video on the index | |
| screen. | |
Cannot find a recorded | (Video files that have damaged management information can be played back.) | |
• Cancel group display and date search functions. | ||
video/image. | • Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA | |
| FOR IMAGE]. (Files on other media are not displayed.) | |
| • Slide the mode switch to select the desired mode (! or #). | |
| • Check the remaining battery pack charge. | |
The lamp does not | (When the battery pack is fully charged, the lamp does not flash.) | |
• When recharging in either a hot or cold environment, ensure that | ||
flash during battery | ||
pack charging. | battery is being charged within the permitted temperature range. | |
(If the battery pack is being recharged outside the permitted temperature | ||
| range, recharging may stop to protect the battery pack.) |
•You need your YouTube™ account to upload files to YouTube™.
Cannot upload the file | Create your account. |
| ||
• Refer to “Q&A”, “Latest Information”, “Download Information”, etc. | ||||
to YouTube | ™ | |||
| in [Click for Latest Product Info] in the help of | the provided Everio | ||
|
| MediaBrowser software. |
| |
|
| |||
Cannot export the file | • Refer to “Q&A”, “Latest Information”, “Download Information”, etc. | |||
to iTunes® |
| in [Click for Latest Product Info] in the help of | the provided Everio | |
| MediaBrowser software. |
| ||
|
|
| ||
LTo reset the camcorder when it does not operate normally
!Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it.
#Execute [FACTORY PRESET].
