Necessary Settings before Use
Charging the Battery Pack
1 Close the LCD monitor to turn off the camcorder.
2 Attach the battery pack, then connect the AC adapter.
•With the “v” (arrow) on the battery pack pointing at the correct direction, slide the battery pack until it locks in place.
LTo check the remaining battery power See page 21.
LRequired charging/recording time (approx.)
*When the LED light is off and the monitor backlight is set to [STANDARD] mode.
Battery pack | Charging time | Recording time |
|
|
|
1 hr. 50 min. | 2 hr. 45 min.* | |
(Provided) |
|
|
|
|
|
2 hr. 40 min. | 5 hr. 25 min.* | |
|
|
|
3 hr. 40 min. | 8 hr. 10 min.* | |
|
|
|
GETTING STARTED
DC Jack | LTo detach the battery pack |
|
v Arrow 
AC Adapter To AC Outlet (110V to 240V)
•The power/charge lamp blinks to indicate charging has started.
•When the lamp goes out, charging is finished.
NOTE
•You can also use the camcorder with just the AC adapter.
•The actual recording time may shorten depending on the recording environment, such as when recording scenes with fast moving subject.
•Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.
