Bosch Appliances VG5 600 user manual Special Preset Commands, Preset Command Description

AutoDome 600 Series Analog PTZ CameraAlternative Control Protocols en 35

4.2.4	Special Preset Commands
		Some Pelco mode preset commands have a special meaning and override the normal Pelco
		preset function as follows:
		Preset Command	Description
		33-PRESET	Pans the AutoDome 180° (Flip).
		34-PRESET	Goes to Zero Pan (original home position).
		80-PRESET	Toggles the Synchronization Mode between Line Lock and Internal
			(Pelco Frame Scan). This command is available if commands are
			unlocked using the Main menu.
		81-PRESET	Initiates Preset Tour 1.
		82-PRESET	Initiates Preset Tour 2.
		92-PRESET	Sets the Left pan limit for an AutoScan with Limit Stops enabled.
		93-PRESET	Sets the Right pan limit for an AutoScan with Limit Stops enabled.
		94-PRESET	Initiates a Preset Tour.
		95-PRESET	Enables or disables Limit Stops in the Setup Menu for AutoScan.
			Invokes the Pelco main Setup Menu when pressed for 2 seconds.
		96-PRESET	Stops a scan.
		97-PRESET	Initiates FastAddress (Pelco Random Scan).
		98-PRESET	Toggles the Synch. Mode between Line Lock and Internal (Pelco Frame
			Scan). This command is available only for two (2) minutes after the
			power is applied and then reverts to normal preset functionality.
		99-PRESET	Starts an AutoScan

NOTICE!

Some Pelco controllers do not support all the preset command numbers. Consult the specific Pelco controller's documentation for supported preset commands.

Bosch Security Systems, Inc. User Manual F.01U.270.005 2.0 2012.06