Bosch Appliances VG5 600 user manual Pelco On-Screen Menus

36 en Pelco On-Screen MenusAutoDome 600 Series Analog PTZ Camera

5	Pelco On-Screen Menus
	You can program the AutoDome through the Pelco on-screen display (OSD) menus. To access
	the Pelco menus, you must configure the AutoDome for Pelco Mode and invoke the Pelco
	main Setup Menu.
5.1	Setup Menu
	The Pelco main Setup Menu provides access to the programmable AutoDome settings. Some
	menu items are locked and require a system password to use. Menu items marked with an *
	are the default settings.
	To open the Pelco main Setup Menu (locked commands):
	1. Press 95-PRESET(press the PRESET button for approximately 2 seconds to open).
	2.	Use the joystick to highlight a menu item.
	3.	Press either the Focus or the Iris key to open a menu item.
	4.	Follow the on-screen instructions at the bottom of the screen.
			Setup Menu
			Exit...
			Command Lock:	OFF
			Bosch Menu
			Camera Setup
			PTZ Setup
			Edit Password
			*FastAddress:	Not Set
			Advanced
			Software Version
			Ack and Reset Alarms
			Restore All Settings
			Reset All Memory
			* = Factory Setting
			Focus / Iris: Select

NOTICE!

Use Zoom to select the Exit item from anywhere in a menu.

Menu	Description
Exit	Exits the menu.
Command Lock	Allows or prohibits accessing locked commands. (If password is
(locked)	set, you are prompted to enter the password.
Bosch Menu (locked)	Accesses the full AutoDome configuration menu and all AutoDome
	settings.
Camera Setup	Accesses the White Balance and Night Mode camera settings.
PTZ Setup	Accesses the tours, tour periods, scan speed, edit presets, limit
	stops, recording, and AutoPivot settings.
Edit Password	Changes the password.
(locked)
FastAddress (locked)	Sets or changes a camera address.

F.01U.270.005 2.0 2012.06 User Manual Bosch Security Systems, Inc.