Specifications, Wireless Extender User Guide

RX8001 User Guide

5Select the Extender that you want to configure and click on the Configure button. The Configuration Tool opens in the browser.

6Select Firmware Update in the left navigation pane. The Firmware Update page opens.

7Follow the onscreen instructions.

When you are asked to browse to the update file, you need to select the ZIP file you downloaded earlier from the website.

Tip When your Extender is not recognized by the Extender Discovery tool, update the Extender with the crossed Ethernet cable, as described on page 9.

ENGLISH

Specifications

The specifications and design of this product are subject to change without notice.

General	Dark grey ABS housing with poly carbonate front plate
	802.11 b/g compliant RF technology
	4 LED indications for Power, WiFi, Network and Busy
	Up to 16 extenders and 16 control panels in a system (for all modes)
	4 addressable outputs for IR emitters
	Ethernet RJ45 connection
	Rotatable RF antenna
	Positioning: freestanding or mounted in any position

Modes	Stand-alone (wireless): Similar to WiFi ad-hoc mode; no access point and
	router required
	Network (wireless): Similar to WiFi infrastructure mode; used in a system with
	a router and access point
	Network (wired via Ethernet): used in a system with a router and access point

Dimensions	3,98 x 6,18 x 1,3 inch (101,2 x 157 x 33,5 mm)

Operating temperature	32°F to 122°F (0°C to 50°C)

Infrared (IR)	IR frequency range: 25kHz-1MHz (including DC/flash codes)
	IR power out: 2 levels

Radio Frequency (RF)	802.11g at 2.4 GHz with additional proprietary protocol

Dual IR emitters	Number of IR emitters: up to 4 (2x2), emitters wired in series
	0.13 inch (3.5 mm) mono mini-jack
	Cable length: 9 ft (2.7 meters)

Mono mini-jack cables	0.13 inch (3.5 mm) mono mini-jack
	Cable length: 5 ft (1.5 meters)

Power adapter	100V-240 VAC / 50-60 Hz Power adapter (5 VDC/2A output, UL-CE approved)

Accessories	Warranty certificate (For USA/Canada only)

©Marantz Brand Company – A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, Kawasaki- SHI, Kanagawa, 210-8569, Japan.

All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.

Marantz Brand Company – A division of D&M Holdings Inc. is not liable for omissions or for technical or editorial errors
in this manual or for damages directly or indirectly resulting from the use of the Wireless Extender.
The information in this User Guide may be subject to change without prior notice. All brand or product names are	10
trademarks or registered trademarks of their respective companies or organizations.	10