Marantz SR6001 specifications Tuner contents, XM Contents

SR6001 RS-232C Control Specification

Page: 12 / 19

Document Version [1.00]

		Command		Reply from Slave
		TOGGLE	“NGT:0”	“NGT:0” (invalid)
	NIGHT MODE	OFF	“NGT:1”	“NGT:1” (OFF)
		ON	“NGT:2”	“NGT:2” (ON)
		VALUE	“LIP:0xxx”	“LIP:xxx” (xxx = value ms)
	Lip Sync.		(xxx = value ms)
				xxx = “000” (OFF)
		UP	“LIP:1” (up 10ms)
				xxx = “010” ~ “200” (ON)
		DOWN	“LIP:2” (down 10ms)
	Test Tone	TOGGLE	“TTO:0”	“TTO:1xy” (OFF)
	(Force	OFF	“TTO:1”
				“TTO:2xy” (ON)
	start/stop Test	ON	“TTO:2”
				(x: Auto=0, Manual=1)
	Tone with Auto	NEXT	“TTO:3”
				(y=Ch.)
	mode)	PREV	“TTO:4”
5-1-4. Tuner contents
		Command		Reply from Slave
		VALUE	“TFQ:0xxxxx“	“TFQ:xxxxx” (xxxxx = Frequency)
				if ( xxxxx < 00256 ), band = XM;
			(xxxxx = freq.)
	Tuner1			else if (xxxxx < 02000), band=AM;
		UP	“TFQ:1“
				else band=FM;
	Frequency	DOWN	“TFQ:2“	(ex.“08750” = FM87.50MHz)
		Auto-UP	“TFQ:3“	*Auto-UP/DOWN dose not operate in XM
		Auto-DOWN	“TFQ:4“	*XM can be selected When Band is XM.
		VALUE	“TPR:0ww”
		UP	“TPR:1”	“TPR:ww”
	Tuner1 Preset	DOWN	“TPR:2”	(ww = current preset nr.)
		P-Scan start	“TPR:3”	(ww = 01 ~ ??)
		P-Scan stop	“TPR:4”
		TOGGLE	“TMD:0”	“TMD:0”( - )
	Tuner1 mode	OFF(MONO)	“TMD:1”	“TMD:1” (MONO)
		ON(AUTO)	“TMD:2”	“TMD:2” (AUTO)
	Tuner Preset	TOGGLE	“TPI:0”	“TPI:1” (OFF)
		OFF	“TPI:1”
	Info.	ON	“TPI:2”	“TPI:2” (ON)
	Tuner1 MEMO	-	“MEM:0”	ACK
	Tuner1 CLEAR	-	“CLR:0”	ACK
5-1-5. XM Contents
		Command		Reply from Slave
		TOGGLE	“XDP:0”	“XDP:1”(NORMAL)
		NORMAL	“XDP:1”
	XM DispMode			“XDP:2”(ART/SNG)
		ART/SNG	“XDP:2”
				“XDP:3”(CATEGORY)
		CATEGORY	“XDP:3”
				“XDP:4”(STATUS)
		STATUS	“XDP:4”
		TOGGLE	“CAT:0”	“CAT:yxx”
		CH. UP	“CAT:1”
	XM Category	CH. DOWN	“CAT:2”	(y: Un search=1, in search=2)
		CAT. NEXT	“CAT:3”	(xx: Category No. 00(none), 01 to 32)
		CAT. PREV	“CAT:4”

Company Restricted