ENGLISH
MULTI ROOM SYSTEM
The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR7300 is located.
To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below.
For details, refer to the instruction manual supplied with the multi room remote control unit and receiver.
When the outputs of the MULTI ROOM OUT terminals are wired and connected to amplifiers installed in other rooms , different sources can be played in rooms other than the main room in which this unit and the playback devices are installed.
SR7300 has some feature to MULTI ROOM SYSTEM as source selector, OSD information, sleep timer and remote control.
MULTI ROOM PLAYBACK USING THE
MULTI ROOM OUT TERMINALS
The SR7300 is equipped with audio
A separately sold stereo power amplifier (SM6100) can be connected to enjoy multi room playback.
Operation to MULTI ROOM OUT without the remote controller.
2. | 1. | 2. |
AV SURROUND RECEIVER SR7300
SURROUND
1. Press the MULTI ROOM button. The unit enters multi room mode and the display indicates “SELCT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.
2. In this time, you can select the input source by pressing the input selector buttons.
Then, the display indicates “MULTI VOL” “VOLUME xx dB” for approx. 5 seconds.
3. During this time, you can set the volume level in the multi room as desired.
This will only set the volume in the second room.
OPERATION TO MULTI ROOM OUTPUTS WITH THE REMOTE CONTROLLER FROM
SECOND ROOM.
2.
1.
1. Press the MULTI on multi room remote control unit from the
MULTI ROOM.
This operations will put the SR7300 into multi room mode and “MULTI” will light in the display.
MULTI ROOM Video output will show OSD information to condition of MULTI ROOM setup.
MU L T I ROOM
MU L T I ROOM | : | O F F |
V I D EO | : | D V D |
A UD I O | : | D V D |
V O L UME S E T U P | : | V AR I AB L E |
V O L UME L E V E L | : | - 9 0 d B |
S L E E P T I ME R | : O F F | |
- - - - MA I N - ROOM |
| S T A T U S - - - - |
V I D EO : D V D | AUD I O : D V D | |
MA I N |
| E X I T |
2. Press the VOL. or VOL. button on the multi room remote control unit to set the desired sound volume.
3. In multi room mode, the multi room remote control unit can be used in the multiroom to operate the following functions.
General:
•Controlling volume level, sleep timer, and muting. Selecting input audio and video source.
Tuner:
•Selecting band, controlling preset channel up and down, tuning up and down, direct frequency call.
Notes for multi room system:
•The MULTI ROOM OUT is analog outputs. This is not support to digital signals input.
•If Tuner (FM or AM) is active in main room, you can not control any function of tuner.
In this case, you can listen the same condition as main room.
38
