Marantz SR7300 manual English, Preference, Surround, Channel Level

ENGLISH

Notes:

•Speakers that you selected “None” for in the Speaker Size menu will not appear.

•The setting of Surr.Back L and Surr.Back R appears if set for two surround back speakers in the Speaker Size menu.

•The setting of Surr.Back appears if set for one surround back speaker in the Speaker Size menu.

•To adjust the speaker levels for 7.1-channel input sources, you will need to use the 7.1CH-INPUT sub menu. (See page ??).

3 PREFERENCE

3 P R E F E R E NC E
S T ANDB Y MOD E	:	E CONOMY
T V - AU T O	: D I S AB L E
O S D I N F O	:	E NAB L E
MA I N		E X I T

1.	Select “PREFERENCE” in SETUP MAIN MENU with or
2.	cursor button, and press the OK button.
	To select a desired content, press or cursor button.

STANDBY MODE: When this function is set to “ECONOMY”, you can reduce the power consumption to standby

condition.

Note: TV-AUTO , MULTI RC control and

RC232C are disable in “ECONOMY” setting.

TV AUTO: Select the TV AUTO ON/OFF function to enable or disable with or cursor button.

(refer to page 32)

OSD Info: Select the OSD information function to enable or disable with or cursor button.

If you select “ENABLE”, SR7300 will display the status of the feature (Volume up/down, input select, etc..) on the TV monitor. But if you do not desire this information, select “DISABLE ”.

If you finish the setup in this item, move cursor to “MAIN” with or cursor buttons and press OK button.

4 SURROUND

	4 S URROUND
	S URR . MOD E : AU T O
	H T - EQ		:	O F F
	L F E L E V E L		: 0 d B
	C E N T E R		:	0	d B
	S URR	L	:	0	d B
	S URR	R	:	0	d B
	S URR	BACK	:	0	d B
	S UB W		:	0	d B
	MA I N				E X I T
1. Select “SURROUND” in SETUP MAIN MENU with or						cursor
button, and press the OK button.
2. To select a desired content , press			or		cursor button.
SURR-MODE :Select the desired surround mode with						or
	cursor button.

HT-EQ :Select to active the HT-EQ with or cursor button.

The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance.

The HT-EQ feature can be activated only while in Dolby Pro Logic Mode, or while decoding Dolby Digital or DTS encoded material.

LFE LEVEL : Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select 0dB, -10 dB or OFF with Left or Right cursor button.

CHANNEL LEVEL

CENTER LEVEL: Set the effect level of the center speaker between – 10 and +10 dB level in 1 dB level interval .

•If “None” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

SURR L LEVEL: Set the level of the Surround left speaker between – 10 and +10 dB level in 1 dB level interval.

•If “None” was selected for the Surround left speaker setting in the Speaker size, then this setting will not appear.

SURR R LEVEL: Set the level of the Surround speaker between –10 and +10 dB level in 1 level interval.

•If “None” was selected for the Surround right speaker setting in the Speaker size, then this setting will not appear.

SURR BACK LEVEL: Set the effect level of the Surround Back speaker between –10 and +10 dB level in 1 dB level interval.

•If “None” was selected for the Surround back speakers setting in the Speaker size, then this setting will not appear.

SUB W LEVEL: Set the effect level of the subwoofer speaker between –15 and +10 dB level in 1 dB level interval.

•If “None” was selected for the Subwoofer speaker setting in the Speaker size, then this setting will not appear.

If you finish the setup in this item, move cursor to “MAIN” withor cursor buttons and press OK button.

24