Marantz SR7300 English, Examples Of Macro Programs, Now, execute the macro you just programmed

ENGLISH

EXAMPLES OF MACRO PROGRAMS

Example 1

Change the input source for the amplifier to CD and play the 3rd track on a CD in the CD player.

1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.

•LEARN and MACRO is displayed blinking.

Example 2

Turn the main amplifier ON → Change the amplifier’s input source to DVD → Set the Surround mode to VIRTUAL → Set the DVD player to

PLAY

1. Press and hold the T.MODE and MENU button until the MACRO is displayed on the LCD.

•LEARN and MACRO is displayed blinking.

2. Press the CD Function button. CD-M is displayed on the LCD.

3. Press CD, 3 , and 3 buttons.

(2)

(3)

(1)

4. When you are finished programming the macro, press the OK button until the display returns to USE mode.

Now, execute the macro you just programmed.

1. Press the CD Function button for 3 seconds.

•The macro commands are transmitted to the components in order, and the steps of the operations are displayed on the LCD in order.

2. Press the DVD Function button .

•Here the DVD Function button is used as the macro button, but any function button can in fact be used.

3.To set the various steps of the macro, press the following buttons

in order:

(1) AMP*→ (2) POWER ON → (3) DVD → (4) AMP*→ (5) 8 (VIRTUAL) → (6) DVD* → (7) 3.

(2)

(5)

(7)

(3) (6)

(1) (4)

4. When you are finished programming the macro, press the OK button until the display returns to USE mode.

Now, execute the macro you just programmed.

1.Press the DVD Function button for 3 seconds.

The macro commands are transmitted in order, and the steps of the operations are displayed on LCD in order.

•When executing this macro, function operations AMP* and DVD* only switch the command set of the remote controller and no signal is transmitted to the component.

44