PL II PRO Logic II Music Parameter, Multi Room

5 PL II (PRO LOGIC II) MUSIC PARAMETER

Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs.

In this mode, SR7300 includes three controls to fine-tune the soundfield as follow.

	5 P L II MUS I C	PARAME T ER
	PARAME T ER	: DE F AU L T
	PANORAMA	: OF F
	D I MEN S I ON	:	4
	CEN T E R W I D T H	:	0
	MA I N		E X I T

Select “PRO LOGIC II” in SETUP MAIN MENU with or				cursor
button, and press the OK button.
PARAMETER: Select “DEFAULT” or “CUSTOM” with				or

cursor button

If you select “CUSTOM”, you can adjust three parameters as follow

PANORAMA: Select the Panorama mode On or Off with or cursor button.

Panorama wraps the sound of the front left and right speakers around you for an exciting perspective.

DIMENSION: Set the Dimension level between 0 and 6 level in 1 level interval with or cursor button.

Adjust the soundfield either towards the front or towards the rear.

This can be useful to help achieve a more suitable balance from all the speakers with certain recordings.

CENTER WIDTH: Set the Center width level between 0 and 7 level in 1 level interval with or cursor button.

Center Width allows you to gradually spread the center channel sound into the front left and right speakers.

At its widest setting, all the sound from the center is mixed into the left and right.

This control may help achieve a more spacious sound or a better blend of the front image.

If “None” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

If you finish the setup in this menu, move cursor to “MAIN” with or cursor buttons and press OK button.

6 CS II PARAME T ER

T RUBA S S	:	0
SRS D I A LOG	:	0

		MA I N	E X I T
1.	Select “CS II” in SETUP MAIN MENU with			or	cursor button,
2.	and press the OK button.
2.	To Select desired contents as below, press			or	cursor button

TRUBASS: Set the TRUBASS level between 0 and 6 level in 1
level interval with	or	cursor button.	ENGLISH
This can be popped out of the surround audio effects
TRUBASS produced by the speakers to be an octave
below the actual physical capabilities of the speakers
adding exciting, deeper bass effects.
SRS DIALOG: Set the SRS DIALOG level between 0 and 6 level in 1
level interval with	or	cursor button.

allowing the listener to easily discern what the actors say.

If “NONE” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

If you finish the setup in this menu, move cursor to “MAIN” with or cursor buttons and press OK button.

SR7300 has some feature to MULTI ROOM SYSTEM as source selector, OSD information, sleep timer, Multi Room Speaker output and remote control.

7 MU L T I ROOM

1. Select “MULTI ROOM” in SETUP MAIN MENU with or					cursor
button, and press the OK button.
2. To Select desired contents as bellow , press			or	cursor button
MULTI ROOM: To switch on the Multi-room output ON or
OFF, press	or	cursor button.
VIDEO: Select the video source of the Multi-room
output with	or	cursor button.
AUDIO: Select the audio source of the Multi-room
output with	or	cursor button.
VOLUME SETUP: Select whether the Multi-room output level is
variable or fixed with a			or	cursor button.
VOLUME LEVEL: Adjust the Multi-room output level with					or

cursor button.

SLEEP TIMER: SLEEP timer function is available during the multiroom is active, set the time with or cursor button.

MAIN ROOM STATUS: Selected input source in the main room will be displayed.

Notes:

•If “VOLUME” is set to “FIXED”, the multi-room output level cannot be adjusted from the second zone.

If you finish the setup in this menu, move cursor to “MAIN” with or cursor buttons and press OK button.