CONNECTIONS
PAGE 13
Connectingtoa TVequippedwithcomponentvideoinputs
PROGRESSIVE SCAN: Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
COMPONENT VIDEO OUT: Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.
■To switch the output signal (Progressive/Component)
Set the Progressive to “On” on the SETUP menu for Progressive signal, or set the Progressive to “Off” on the SETUP menu for Component video signal.
VIDEO OUTPUT SELECT switch
| Video cable (Y, CB, CR) (not supplied) |
| To COMPONENT VIDEO OUT/ |
To AUDIO OUT (L/R) | PROGRESSIVE SCAN (CB, CR, Y) |
When using COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jack, set the VIDEO OUTPUT SELECT switch to
COMPONENT/PROGRESSIVE SCAN.
Audio/Video cable (supplied)
To component video input or progressive scan video input
To audio inputs
TV or monitor with component video or progressive scan inputs
Notes
❍Refer to the owner’s manual of your TV as well.
❍Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
❍Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y,
❍In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.