Rear Panel
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right) Connect to an amplifier, receiver, or stereo system.
**REMOTE CONTROL |
INTERNAUEXTERNAL |
Switch |
* REMOTE CONTROL IN/OUT jack
VIDEO OUT
Connect to a TV with video inputs.
5.1CHANNEL AUDIO OUT Connect to a 5.1 channel receiver
– center speaker connection
– subwoofer connection
– front speakers connections
– rear (surround) speakers connections
Connect to a TV with
RS232C Terminal | AC Power Cord |
Control terminal for use by | Plug into the power source. |
custom installers. |
|
* REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component uslng a supplled System Control cable, you can remotely operate the components as a single system.
•When connecting to component with a remote sensor, be sure to connect the “REMOTE CONTROL IN” jack of this DVD player to the “REMOTE CONTROL OUT” jack of the component with the remote semsor.
•When connecting to component which is not equipped with a remote sensor, be sure to connect the component to the “REMOTE CONTROL OUT” jack of this DVD player.
** Remote switch
•When using this DVD player independently, set this switch to “INTERNAL”. When using this DVD player in a sys- tem with a Marantz receiver equlpped with a remote sensor, set the switch to “EXTERNAL”.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
8
