Marantz VP-11S2 OSD/Blanking, Blanking Top, Bottom, Left and Right, Adjustments Menu Position

OSD/Blanking

– Blanking Top, Bottom, Left and Right

Set the blanking width of the top, bottom, left and right masks, which are then memorized in Memory 1

Standard 1

Picture Adjust

Fine Menu 1

Fine Menu 2

Input Signal

RGB/HD Adjust

HDMI

Display

OSD/Blanking

Config.

Menu Position	Top-L
Language	English
Status Info.	Enable
Power-OFF Confirm.	Disable
Blanking Memory	Memory 1
Blanking Top	0
Blanking Bottom	0
Blanking Left	0
Blanking Right	0

– 3 of Blanking Memory. Each can be set from 0 (no mask) to a maximum 100.

ENGLISH

Item		Adjustments
Menu Position	Top-L, Top, Top-R, Center-L, Center, Center-R,
	Bottom-L, Bottom, Bottom-R
Language	English, Deutsch, Français, Español,
	Português, Italiano
Status Info.	Enable, Disable
Power-OFF Confirm.	Enable, Disable
Blanking Memory	Off, Memory 1, Memory 2, Memory 3
Blanking Top	0		100
Blanking Bottom	0		100
Blanking Left	0		100
Blanking Right	0		100

–Menu Position

OSD position is selected from 9 positions.

–Status Info.

Enable: Displays the current status of the projector for a set amount of time in the upper right-hand corner of the screen at startup and whenever the Input Source, Picture Mode, Aspect ratio or other setting is changed.

Disable: Does not display Status Info.

–Power-OFF Confirm.

Disable: Directly puts the projector on standby without displaying the confirmation message when power

is shut off from the button on the remote controller or the /I button on the projector. Enable: Displays a confirmation message asking whether to shut the power off or continue use

when power is shut off from the button on the remote controller or the /I button on the projector. To shut off the power immediately, select “Yes” and press the ENTER button. To not shut off the power, select “No” and press the ENTER button.

–Blanking Memory

Sets the blanking mode with which part of the screen can be hidden in black bands. To use this mode or change the setting, select from Memory 1 to 3.

Off: Turns the blanking mode off. No masking occurs.

Memory 1-3: Memorize the blanking width of the top, bottom, left and right masks set with the below features. Up to three settings can be memorized.

29