ENGLISH
PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW
Front and Top View
!3
Projection |
|
Lens |
|
| !4 IR sensor |
q Focus ring (☞ P.11) | y ENTER button |
Adjust the picture focus. | Press to enter the selected menu item. |
!0ON indicator
Lights up blue when power is ON. When power is shut OFF, the lamp flashes for about 1 minute before going out.
!1STANDBY indicator
Lights up green when the projector is on standby.
!2WARNING/LAMP indicator
Flashes or lights up when something is wrong with the lamp cover, lamp, fan, or temperature inside the projector.
For more information on the error mode, see the “Error Mode List” (☞ P.35)
!3Ventilation holes (intake)
!4Ventilation holes (exhaust)
Notes:
•Do not place anything near the ventilation holes to avoid overheat inside the unit.
•Do not place your hand or objects near the ventilation holes; the air is coming out.
Note: Pixel defects
DLP® chip is one of the most advanced technologies for consumer products. The DLP® chip made by high precision technology, however some pixel defects may be found on the projected image. We are trying our best to control the quality in order to reduce the number of defective pixels. It is almost impossible to have zero pixel defects, even using the most advanced technology. This is not a problem only for Marantz, but all DLP® projector manufactures. Therefore we have to note that the warranty does not cover the DLP® chip for pixel defects. We appreciate your understandings.
Note: Lamp
SHP lamp is one of the most advanced technologies for consumer products. The lamp made by high precision technology, however some lamps might be failing before it reaches its life. And projector’s brightness is getting darker along with accumulated lamp usage hours. We are trying our best to control the quality in order to reduce lamp failures. It is almost impossible to have zero failure, even using the most advanced technology. This is not a problem only for Marantz, but all projector manufactures. Therefore we have to note that the warranty does not cover the SHP lamp for lamp failures: explosion, and non- lighting except initial use. And also we have to
wZoom ring (☞ P.11)
Adjust the size of the projected image.
eLens Shift knob (☞ P.12)
Manually adjust the position of the image vertically.
r
/ I button (☞ P.18)
Press to turn the projector ON or STANDBY mode.
tMENU button (☞ P.21)
Display the
uINPUT SELECT button (☞ P.18)
Selects the input signal (COMPONENT 1, COMPONENT 2,
iPATTERN button (☞ P.11)
Projects a focus pattern on the screen.
oThe 3 / 4 / 1 / 2 buttons
Control the MENU cursor.
note that the warranty does not cover the SHP lamp for lamp failures: flickering, and getting darker along with accumulated lamp usage hours. We appreciate your understandings.
4
