Fine Menu 1
Fine Menu 2
ENGLISH
By adjusting this Fine Menu, you can make fine picture adjustment.
Standard 1
Item | Adjustments |
Standard 1
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal |
RGB/HD Adjust |
HDMI |
Display |
OSD/Blanking |
Config. |
Noise Reduction | 0 |
R Gain | 0 |
G Gain | 0 |
B Gain | 0 |
R Bias | 0 |
G Bias | 0 |
B Bias | 0 |
Luminance Gain | 0 |
Chroma Delay | 0 |
Picture Adjust
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
HDMI |
Display |
OSD/Blanking |
Config. |
Aspect | Full |
Cinema | Auto |
VCR Mode | On |
Black Level | 0 IRE |
FRC | Auto 1 |
CEC | Off |
Picture Shift V | 0 |
Overscan | Enable |
Aspect | Full, Normal, Zoom, |
| |
Cinema | Auto, Off |
VCR Mode | On, Off |
Black level | 0 IRE, 7.5 IRE /Expand, |
| Normal (For HDMI input) |
FRC | Auto 1, Auto 2, 60Hz, |
| 50Hz, 48Hz |
CEC | On, Off |
Item | Adjustments |
Noise Reduction | 050 |
R Gain | |
G Gain | |
B Gain | |
R Bias | |
G Bias | |
B Bias | |
Luminance Gain | |
Chroma Delay |
–Noise Reduction
Adjust the noise reduction.
–R Gain
This menu allows the users to set the gain for red.
–G Gain
This menu allows the users to set the gain for green.
–B Gain
This menu allows the users to set the gain for blue.
–R Bias
This menu allows the users to set the bias for red.
–G Bias
This menu allows the users to set the bias for green.
–B Bias
This menu allows the users to set the bias for blue.
–Luminance Gain
This menu allows the users to set the luminance gain.
–Chroma Delay
This menu allows the users to set the chrominance delay.
Note :
•The settings made in Fine Menu 1 are saved in the currently selected Picture Mode index (Default excluded).
26
Picture Shift V | |
Overscan | Enable, Disable |
–Cinema
Auto : Automatically selects the cinema mode when a video signal is input.
NTSC:
Off :
–VCR Mode
On : A projector is forced into the
Off : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown for 625/50 sources).
–Black level
Select the black level by a video source.
–FRC (Frame Rate Conversion)
Auto 1 : Frame Rate Conversion function is basically off. However FRC turns on automatically depending on vertical frequency of input signal. Normally, use this mode.
Auto 2 : Use this mode when the image stops momentarily.
60Hz : Frame Rate Conversion function is “On”. (59.94Hz fixed)
50Hz : Frame Rate Conversion function is “On”. (50.00Hz fixed)
48Hz : Frame Rate Conversion function is “On”. (47.95Hz fixed)
–CEC (Chroma Error Correction)
On : Reduces CUE (Chroma
Off : Normally, use this mode.
–Picture Shift V
When Aspect on the Picture Adjust menu is set to “Zoom” or
–Overscan
Selects whether to show or hide picture borders with NTSC, PAL, SECAM, 480i, 480p, 576i and 576p signals.
Enable: Does not display borders of image signals. (Normally, use this mode.)
Disable: Displays the entire image signal.
Notes :
•There are some parameters can not adjust according to input signal.
•The settings made in Fine Menu 2 are saved in each currently selected input signal source.
