3. Projection of Images (Basic Operation)
3-4-1. Displaying the test pattern
1Press the TEST button on the remote control. Alternatively, select the test pattern from the signal selection button.
If you register the test patterns to the signal selection buttons (<1> to <8> buttons), select the test pattern according to
The mode for selecting the test pattern is set.
2 Press the SELECT / button.
The display of the test pattern name on the LCD switches.
3Display on the LCD the name of the test pattern to be projected, then press the ENTER button.
The test pattern is displayed.
• To cancel the test pattern display, reselect the signal to be project.
1Press the [LENS CTL] UP/DOWN/LEFT/RIGHT buttons while depressing the CTL (LENS) button, on the control panel of your projector as required.
The position of the projected screen will move upward, downward, left or right.
• When controlling with the remote control, press the POSI/LENS button while depressing the CTL button.
24