NEC NC1600C user manual Selecting the title of input signal, Projection of Images Basic Operation

3. Projection of Images (Basic Operation)

3-3. Selecting the title of input signal

This projector allows you to select pre-registered signals using the signal selection buttons on the control panel (up to 8 signals). Request your dealer/distributor for details on registering and changing titles. This section explains the steps for selecting registered signals.

1Turn on the power to the image devices connected to the projector.

2Press the MENU button.

3Press the [MENU CTL] LEFT/RIGHT button to display “Title Select” on the LCD screen.

At each press of the [MENU CTL] LEFT/RIGHT buttons, the display will cycle as “Title Select” ←→ “Configuration” ←→ “(Title Setup)” ←→ “Information.”

4Press the [MENU CTL] DOWN button.

The title of the input signal is displayed.

•When you have made a wrong selection, press the [MENU CTL] UP button. A return will be made to the previous menu.

5Press the [MENU CTL] LEFT/RIGHT buttons to display “Title of Signal to be Projected” on the LCD screen.

6Press the ENTER button.

The title of the signal to be projected is selected.

• The (*) mark on the LCD indicates that this is the currently selected item.

23