Maretron ACM100 Installation, Quick Install, Unpacking the Box, Choosing a Mounting Location

ACM100 User’s Manual

o230VAC single phase

o380VAC Y Three-phase (380Y)

1.3Quick Install

Installing the Maretron ACM100 involves the following five steps. Please refer to the individual sections for additional details.

1.Unpack the box (Section 2.1)

2.Choose a mounting location (Section 2.2)

3.Mount the ACM100 (Section 2.3)

4.Connect the ACM100 (Section 0)

5.Configure the ACM100 (Section 2.5)

2 Installation

2.1 Unpacking the Box

When unpacking the box containing the Maretron ACM100, you should find the following items:

1 – ACM100 – AC Monitor

1 – AC Current Transformer with 5 ft. (1.5m) long cable (Part # M000630) 1 – Parts Bag containing 4 Stainless Steel Mounting Screws

1 – ACM100 User’s Manual

1 – Warranty Registration Card

If any of these items are missing or damaged, please contact Maretron.

2.2 Choosing a Mounting Location

Please consider the following when choosing a mounting location.

1.The ACM100 is waterproof, so it can be mounted in a damp or dry location.

2.The orientation is not important, so the ACM100 can be mounted on a horizontal deck, vertical bulkhead, or upside down if desired.

3.The ACM100 is temperature rated to 55°C (130°F), so it should be mounted away from engines or engine rooms where the operating temperature exceeds the specified limit.

Page 2 Revision 1.2