MBB100 User’s Manual
Page 14 Revision 1.0
3 Operating the MBB100 3.1 Turning the MBB100 On
To turn on the MBB100, press the power switch, located on the right hand side of the front panel of
the MBB100.
3.2 Turning the MBB100 Off
To turn the MBB100 off, use the “Shutdown” administrative tab of the N2KView® software.
Alternatively, you can power down the unit by pressing the MBB100’s power switch. Lastly, you can
power down the unit by turning of the power source with an external breaker or external switch.
3.3 Using the MBB100
The MBB100 runs a fully functional version of the Maretron N2KView® software. Please refer to the
N2KView® User’s Manual, packaged with the MBB100, for detailed operating instructions.