Mark Levinson 500H

Mark Levinson

3. SetuptheroutertotheIPaddress192.168.50.x–wherex

stands for a number other than 0, 3, 4, 5, 255, or the number

used for the computer IP address. The router must be on the

same subnet as the ampliﬁer and the computer, but also must

have its own unique address. Refer to the router’s owner’s

manual for instructions on how to modify the IP address.

4. Press the Power button on the ampliﬁer.

5. Onthecomputer,opentheInternetExplorerWebbrowser.

6. On the address (URL) line, type in the static IP address of the

amplierprecededby"http://"andpressEnter.(Forexample,

"http://192.168.50.10")Theremaybeashortdelaybeforethe

ampliﬁer Web page loads.

7. The Home tab of the ampliﬁer’s internal Web page is now

displayed.Thetabisinredtexttoindicatethatitisthecurrent

page.

8. Observe that the Status section of the Web page identiﬁes the

host name of the ampliﬁer. The host name can be modiﬁed,

but only the ﬁrst eight characters are affected; anything after

the underscore may not be modiﬁed.

To change the host name of the ampliﬁer:

 A.Typethenewnameintothewhiteboxtotherightofthe

parameter. The new name must be made from the capital

letters, A to Z, and the numbers, 0 to 9. Underscores may

also be used. Only eight characters are allowed.

The host name MUST start with an alpha-character (A to Z). This is a

standard networking rule.

B. Click the Submit button to save the new value.

C. Click the Refresh button in the Status section of the Web

page to observe the new host name.

9. Observe that the Status section of the Web page also identiﬁes

the IP address of the ampliﬁer. The static IP address can be

modiﬁed, if desired.

To change the IP address of the ampliﬁer:

 A.TypethenewIPaddressintothewhiteboxtotherightof

the parameter.

B. Click the Submit button to save the new value.

C. Enter the new IP address of the ampliﬁer into the

browser. The ampliﬁer Web page loads, reﬂecting the new

information.

The network connection is now complete.

Note