15
Nº500H Series Power Amplifier
Network Setup for Windows 2000
1. From the Start menu, select Settings Control Panel.
2. Double-click on the Network and Dial-Up Connections option.
3. Double-click on the Local Area Connection option.
4. Click the Properties button to open the Local Area Connection
Properties menu. If the computer is not currently connected
to an active network, Step 3 has already opened the Local Area
Connection Properties menu.
5. ClickonInternetProtocol(TCP/IP)lineitemsothatitis
highlighted.
6. Click the Properties button.
7. Selectthe“UsethefollowingIPaddress”option.TheIP
address,Subnetmask,andDefaultgatewayboxesarenolonger
grayed out and can now be modified.
8. Enter the following values:
 •IPaddress:192.168.50.x–wherexstandsforanumber
other than 0, 3, 4, 5 or 255
 •Subnetmask:255.255.255.0
 •DonotenteravalueintheDefaultgatewayparameter
The computer must have a unique address and be on the same
subnet as the amplifier.
9. Click“OK”tosaveandexitthemenu.
10.OpentheInternetExplorerWebbrowser.
11. From the menu bar, select the Tools Internet Options menu.
12. Select the Connections tab.
13. Click the LAN Settings button.
14.Verifythat“UseaproxyserverforyourLAN”isNOTchecked.
15.Click“OK”tosaveandexitthemenu.
Use this procedure if you plan to connect with static IP addresses
(DHCPisturnedoff).Otherwise,skiptothenextprocedureto
connect directly to a computer. For the computer to find the
amplier,theTCP/IPandLANsettingsofthecomputermustbeset
up.Refertotheprevious“SettinguptheComputer”procedurefor
instructions.
1. Connect the amplifier to the router, as described in the earlier
“ConnectingtheCables”procedure.Makesurethateverything
is powered off before making cable connections.
2. TurnonthePCandtherouter.VerifythattherouterhasDHCP
turned off, if required.
Connecting With Static IP Addressing