Mark Levinson 500H Internal Web Page , Network Setup Parameters

Mark Levinson

Internal Web Page Network Setup Parameters

When connected to a computer, the Nº500H series has an internal

Web page that provides access to:

• Network Setup – allows the user to modify the network setup

parameters. Accessing the internal Web page is the ONLY way

to modify the network setup parameters of the Nº500H series

ampliﬁer.

• Status Information – provides basic status information of

the Nº500H series ampliﬁer.

• Error Reporting – tracks system-related error messages for

the Nº500H series ampliﬁer. This page is a diagnostics tool for

Mark Levinson Customer Service use.

The ampliﬁer MUST be connected to a computer via the Ethernet

port before you can access the internal Web page. Continue to the

nextsection–“NetworkSetup”–forfurtherinstructions.

The Web page also has a Restore Defaults button, which resets the

parameters to their factory default values. Clicking the Restore

Defaults button displays a pop-up asking for conﬁrmation; click Yes

to restore the factory default values.

Accessible only through the Nº500H series internal Web page, the

network setup parameters include:

• Static IP Address–providesaxedIPaddress.ThisIP

address is NOT automatically selected; it must be entered.

If DHCP is on, then this parameter is not used. IP address

192.168.50.5 is the factory default value for the Nº500H series.