Mark Levinson N433 manual Nº433 Triple-Mono Power Amplifier

Nº433 Triple-Mono Power Amplifier

Rated power output:	200 W/ch rms power @ 8 Ω
	400 W/ch rms power @ 4 Ω

	all above power ratings from 20 Hz–20 kHz at <0.5% THD
	(assuming that the AC mains can deliver adequate current, without its own voltage sagging)
Frequency response:	within 0.2 dB from 20 Hz to 20 kHz
Signal-to-noise ratio:	better than –80 dB (ref. 2.83 V)
Voltage gain:	26.8 dB
Input impedance:	100 kΩ (balanced)
	50 kΩ (unbalanced)
Input sensitivity	2.83 V output: 130 mV
	Full output: 1.82 V
Power consumption:	200 W in on, 100 W in standby, 10 W in sleep
Mains voltage:	Determined by the needs of the country for which the unit was manufactured;
	cannot be reset by dealer or user
Connector complement:	(6)	custom binding posts
	(3)	3-pin XLR balanced input connectors
	(3)	RCA input connectors
	(2)	1/8-inch mini-jacks for remote turn-on
	(1)	RS-232 port on RJ-11
	(2)	Mark Levinson communications ports on RJ-11, RJ-45

(1)IEC-standard AC receptacle

Output impedance: less than 0.05 Ω from 20-20,000 Hz

Overall dimensions:	width:	17.75"	(45.1 cm)
	height:	7.65"	(19.4 cm)
	depth	19.83"	(50.4 cm)
Shipping weight:	130.5 lb	(59.2 kg)
Net weight:	114.5 lb	(51.9 kg)

Specifications are subject to change without notice.

Nº433

channel assembly

Nº433 capacitors