6 PREPARATION | 6 PREPARATION |
|
|
|
|
|
|
|
| VIDEO CASSETTE RECORDER |
|
|
|
|
|
|
| VIDEO CASSETTE RECORDER |
|
|
AUDIO INPUT / AUDIO MONITOR SELECT |
|
| POWER | AUDIO INPUT / AUDIO MONITOR SELECT |
|
| POWER |
| ||||||||
SDI | CH1 | CH2 | CH3 | CH4 | SIF |
|
| SDI | CH1 | CH2 | CH3 | CH4 | SIF |
|
|
|
AES/EBU | CH1 | CH2 | CH3 | CH4 | LINE | ON | I | AES/EBU | CH1 | CH2 | CH3 | CH4 | LINE | ON | I | [POWER] |
L |
|
| L |
|
| |||||||||||
R |
|
|
|
|
| OFF | O | R |
|
|
|
|
| OFF | O | |
ANALOG | CH1 | CH2 | CH3 | CH4 | CPN | COMPONENT DIGITAL |
| ANALOG | CH1 | CH2 | CH3 | CH4 | CPN | COMPONENT DIGITAL |
|
|
|
|
|
|
|
| Variable Motion |
|
|
|
|
|
|
| Variable Motion |
| switch |
CH1 | CH2 |
| CH3 | CH4/TRACKING |
|
|
| CH1 | CH2 |
| CH3 | CH4/TRACKING |
|
|
|
|
CTL TC UB DF SERVO CF GEN 16:9 AP | 525 | CONDITION | COUNTER | RESET | VCON | REMOTE | CTL TC UB DF SERVO CF GEN 16:9 AP | 525 | CONDITION | COUNTER | RESET | VCON | REMOTE |
AUTO OFF P.READ V.VAR PB/EE REMOTE | 625 |
| UB |
|
|
| AUTO OFF P.READ V.VAR PB/EE REMOTE | 625 |
| UB |
|
|
|
|
|
|
|
| MENU | SET HOLD | PB |
| [PB | PB/EE] button |
|
|
|
|
| MENU | SET HOLD | PB |
|
|
|
|
|
| PB/EE |
|
|
|
|
|
| PB/EE |
| ||||||
H | M | S |
| F |
|
|
| STILL | H | M | S |
| F |
|
|
| STILL | ||
ASSEM VIDEO | DA1 | DA2 DA3 | DA4 | EJECT | REC | PLAY | PAUSE/STILL |
|
|
| ASSEM VIDEO | DA1 | DA2 DA3 | DA4 | EJECT | REC | PLAY | PAUSE/STILL |
|
|
|
|
|
|
|
|
| X1 |
|
|
|
|
|
|
|
| X1 |
PHONES | CH1 | CH2 REC CH3 | CH4 | TRACKING | PHONES | CH1 | CH2 REC CH3 | CH4 | TRACKING |
| IN | ENTRY OUT | INSERT | TC | TOP |
| VIDEO | AUDIO |
|
|
| IN | ENTRY OUT | INSERT | TC | TOP |
| VIDEO | AUDIO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
PULL FOR VARIABLE | METER MODE | CANCEL PREVIEW | AUTO EDIT | PREROLL | STAND BY | REW | STOP | FF |
|
| PULL FOR VARIABLE | METER MODE | CANCEL PREVIEW | AUTO EDIT | PREROLL | STAND BY | REW | STOP | FF |
|
|
PULL |
|
|
|
|
|
|
|
|
| PULL | PULL |
|
|
|
|
|
|
|
|
| PULL |
RELEASE | SHIFT | REVIEW |
|
|
|
|
|
|
| RELEASE | RELEASE | SHIFT | REVIEW |
|
|
|
|
|
|
| RELEASE |
PLAY |
| USER | SERVO/SYS | TIME CODE | ON SCREEN | OTHERS | REV | FWD | PLAY |
| USER | SERVO/SYS | TIME CODE | ON SCREEN | OTHERS | REV | FWD |
Notes
●Output mode selection in the Standby ON/OFF mode
Pressing the [PB PB/EE] button switches between Still output or the EE mode. The counter display changes to “PB” or “PB/ EE”.
In the EE mode, the input signal can be monitored.
●When video and audio signals are output from the
To output video signals from the signal generator, press the [VIDEO INPUT] button so that all [VIDEO INPUT] indicators light. Select the video signal type from the signal generator with menu switch No. 111 <VD REC SIGNAL SEL.>.
To output audio signals
(1 kHz, sine wave) from the signal generator, set menu switches No. 253 to No.
256 <CH1 to 4 REC SIGNAL SEL.> to “1 kHz SINE” and press the audio signal select buttons to select the required channels. The corresponding [AUDIO INPUT] indicators will light.
●In the PB mode, pressing the [REC] button allows you to monitor the input signal. Pressing the [STOP] button restores the Play mode.
[STANDBY] button
Two different sub modes are available in the Stop mode.
Standby ON mode: The tape is loaded and the head drums are rotating, permitting quick start of operation when another mode is engaged. The [STANDBY] button is illuminated.
Standby OFF mode: The tape is loaded but the drums are stationary. The tape and the heads are protected against damage in this mode. The [STANDBY] button’s light goes out.
The Output mode in the Standby ON and OFF modes can be selected with the [PB/ EE] button (see notes for details).
Procedure
Standby ON mode is engaged when the cassette is loaded or when the Stop mode is engaged with the STOP button.
To change the Standby ON mode to the Standby OFF mode, press the [STANDBY] button.
[The [STANDBY] button goes out, indicating that the Standby OFF mode has been engaged.
To change the Standby OFF mode to Standby ON mode, press the [STANDBY] button.
[The [STANDBY] button is illuminated, indicating that the Standby ON mode has been engaged.
*The Standby ON mode is automatically switched to the Standby OFF mode after about 5 minutes to protect the tape and the heads. The time when the Standby OFF mode is engaged can be selected with menu switch No. 307 <PAUSE/STILL/STP TIME>.
Notes
●To call up the
●Be sure to use only
cassette tapes.
●Conditional EJECT operation
When menu switch No. 301 <DIRECT EJECT> is set to “OFF (0)”, the [EJECT] button is enabled only in the Standby ON or OFF mode.
With this switch set to “ON (1)”, tapes can be ejected in any mode.
[EJECT] button
Loading the cassette
1.Turn the [POWER] switch on.
[The counter display is illuminated.
*If a cassette is not loaded, the counter display indicates “No Tape” and the
2.Load the cassette.
If tape tension is slack, tighten it before inserting the cassette. Insert the cassette with the cassette label facing you. Press the center of the cassette gently until the loading mechanism takes over.
[The cassette is automatically drawn into the slot and the [STOP] button lights.
When the cassette is fully loaded, the Standby ON mode is engaged and the [STANDBY] button lights.
*When a cassette tape with the REC switch set to OFF is loaded, “REC Inh” is shown on the tape counter display for about 2 seconds.
Unloading the cassette
1.Press the [EJECT] button.
[The cassette is ejected. The CTL counter is reset.
2.Remove the cassette from the slot.
Precautions
●Do not insert anything other than a cassette into the slot.
●Do not try to remove the cassette once automatic cassette loading has begun. Wait until loading is complete, then press the [EJECT] button.
66 | 67 |
