JVC BR-D95U specifications Manual Tracking Ajustment, Play volume control, Dbfs

8 PLAYBACK

8-3. AUDIO PLAYBACK LEVEL ADJUSTMENT

8 PLAYBACK

8-4 MANUAL TRACKING AJUSTMENT

●

The audio level meter’s reference level indication changes depending on the setting of menu switch No. 257 <AUD REF. SIGNAL LEV.> (-20 dB or -18 dB).

1. Set the [CH4/TRACKING] meter to audio level.
METER MODE		• When the [METER MODE TRACKING] button is illuminated or
		blinked, press the [METER MODE TRACKING] button.
FINE	TRACKING
		[ The [METER MODE TRACKING] button goes out and the
		[CH4/TRACKING] meter can be used for the CH4 audio level.
2. Adjust the playback level for each channel (CH1 to CH4) separately with
the [PLAY] volume control.
•	To perform fine adjustment, press the [METER MODE FINE] button.

[The [METER MODE FINE] button is illuminated and the audio

	level meter shows a reference fine level of around -20 dBFS or
METER MODE	-18 dBFS.
FINE TRACKING
Normal mode level indication				Fine mode level indication
CH1	CH2	CH3	CH4/TRACKING	CH1	CH2	CH3	CH4/TRACKING
dB OVER dB	dB OVER dB	dB OVER dB	dB OVER dB	dB OVER dB	dB OVER dB	dB OVER dB	dB OVER dB
0	0	0	0	+4	+4	+4	+4
–10	–10	–10	–10	+2	+2	+2	+2
–20	–20	–20	–20	0	0	0	0
–30	–30	–30	–30	–2	–2	–2	–2
–40	–40	–40	–40	–4	–4	–4	–4
–60	–60	–60	–60

•The reference output level shown by the audio level meter is -20 dBFS or -18 dBFS.

Adjust with the master and balance controls.

The CH1 and CH2 [PLAY] volume controls, and the CH3 and CH4 [PLAY] volume controls work as one set.

The CH1 and CH3 [PLAY] volume controls serve as master volume control and the CH2 and CH4 volume controls as balance control.

•Turn the CH1 or CH3 [PLAY] volume control.

The audio on CH2 or CH4 changes along with CH1 or CH3.

•Turn the CH2 or CH4 [PLAY] volume control to adjust the balance between

CH1 and CH2 or CH3 and CH4.
Pair	Pair
CH1 CH2	CH3 CH4
PLAY	Balance control
Master volume control
Balance control
Master volume control

●

In the Auto Tracking mode, the [METER MODE TRACKING] button lights.

[CH4/TRACKING] meter
						VIDEO CASSETTE RECORDER	BR-D95U
AUDIO INPUT / AUDIO MONITOR SELECT							POWER
SDI	CH1	CH2	CH3	CH4	SIF
AES/EBU	CH1	CH2	CH3	CH4	LINE	ON	I
L
ANALOG	CH1	CH2	CH3	CH4	CPN	COMPONENT DIGITAL	O
R						OFF

Variable Motion

CH1 CH2 CH3 CH4/TRACKING

CTL TC UB DF SERVO CF GEN 16:9 AP	525	CONDITION	COUNTER	RESET	VCON	REMOTE
AUTO OFF P.READ V.VAR PB/EE REMOTE	625		UB
			MENU	SET	HOLD	PB
						PB/EE

STILL

H

M

S

F

ASSEM

VIDEO

DA1

DA2

DA3

DA4

EJECT

REC

PLAY

PAUSE/STILL

X-1

X1

PHONES

CH1

CH2 REC CH3

CH4

TRACKING

IN

ENTRY

OUT

INSERT

TC

TOP

VIDEO

AUDIO

PULL FOR VARIABLE

METER MODE

CANCEL PREVIEW

AUTO EDIT

PREROLL

STAND BY

REW

STOP

FF

PULL

PULL

RELEASE

PLAY

SHIFT

REVIEW

USER

SERVO/SYS

TIME CODE

ON SCREEN

OTHERS

RELEASE

REV

FWD

[TRACKING] adjust knob [METER MODE TRACKING] button

This unit is equipped with an automatic tracking facility which operates during playback to maintain optimum tracking (with menu switch No. 005 <AUTO TRACKING> set to “ON (1)”). With some tapes, noise may still appear — particularly if the tape was recorded on a different VCR. In this case, manual tracking adjustment is also possible.

1.Set menu switch No. 005 <AUTO TRACKING> to “OFF (0)”.

2.Set the [CH4/TRACKING] meter for tracking. Press the right [TRACKING METER MODE] button.

[The [METER MODE TRACKING] button blinks when the meter is switched to Tracking mode.

3.Adjust until the tracking meter level reaches the maximum.

The Auto Tracking mode can be restored by setting menu switch No. 005 <AUTO TRACKING> to “ON (1)”.

78 79