JVC BR-D95U specifications Audio Monitor Output Signal Selection, Audio Record Level Adjustment

7 RECORDING

7-3 AUDIO MONITOR OUTPUT SIGNAL SELECTION

Select the audio to be output to the headphones jack or the rear panel [AUDIO MONITOR L/R] connectors. Select

a single channel or mixed audio from the four available channels. During playback, select the playback audio monitor

output signal.

7 RECORDING

7-4 AUDIO RECORD LEVEL ADJUSTMENT

●Audio signal recording level can be adjusted.

L channel			Channel indicators
AUDIO	AUDIO INPUT / AUDIO MONITOR SELECT					VIDEO
INPUT						INPUT
	SDI	CH1	CH2	CH3	CH4	SIF
AUDIO	AES/EBU	CH1	CH2	CH3	CH4	LINE
MONITOR	L
[AUDIO MONITOR]	ANALOG	CH1	CH2	CH3	CH4	CPN
button	R
R channel	CH1		CH2 CH3 CH4			Audio signal select buttons

	[REC] volume controls
PHONES	CH1	CH2 CH3	CH4	TRACKING
		REC
		PULL FOR VARIABLE	METER MODE
			FINE	TRACKING
		PLAY
			2	1

VIDEO CASSETTE RECORDER

BR-D95U

AUDIO INPUT / AUDIO MONITOR SELECT

POWER

SDI

CH1

CH2

CH3

CH4

SIF

AES/EBU

CH1

CH2

CH3

CH4

LINE

ON

I

L

ANALOG

CH1

CH2

CH3

CH4

CPN

COMPONENT DIGITAL

OFF

O

R

Variable Motion

CH1

CH2

CH3

CH4/TRACKING

CTL TC UB DF SERVO CF GEN 16:9 AP

525

CONDITION

COUNTER

RESET

VCON

REMOTE

AUTO OFF P.READ V.VAR PB/EE REMOTE

625

UB

MENU

SET

HOLD

PB

PB/EE

STILL

H

M

S

F

ASSEM

VIDEO

DA1

DA2

DA3

DA4

EJECT

REC

PLAY

PAUSE/STILL

X-1

X1

PHONES

CH1

CH2

REC CH3

CH4

TRACKING

IN

ENTRY

OUT

INSERT

TC

TOP

VIDEO

AUDIO

PULL FOR VARIABLE

METER MODE

CANCEL PREVIEW

AUTO EDIT

PREROLL

STAND BY

REW

STOP

FF

PULL

PULL

RELEASE

PLAY

SHIFT

REVIEW

USER

SERVO/SYS

TIME CODE

ON SCREEN

OTHERS

RELEASE

REV

FWD

●When the [AUDIO INPUT] button is illuminated, the channel indicator can be used to select the input audio signal.

●Select the output level mode for audio monitor mixing output with menu switch No. 222 <MONITOR MIX MODE>.

●Setting the audio monitor output level

Set the audio monitor L and R channel output levels to +4 dB, 0 dB or +6 dB with menu switches No. 232 and No. 233.

1. Press the [AUDIO MONITOR] button so that the [AUDIO MONITOR] button
is illuminated.
AUDIO	● When the [AUDIO MONITOR] button is illuminated, the audio channel
MONITOR
		indicator can be used for the audio monitor output signal.
2. Select the audio monitor output signal by pressing the audio signal select
button.
Select the audio signal from CH 1 to CH 4 to be output to the L and R channels
of the [AUDIO MONITOR] connectors and the headphones jack.
The selected channel indicator lights.
AUDIO INPUT / AUDIO MONITOR SELECT
SDI	CH1	CH2	CH3	CH4
AES/EBU		CH2	CH3	CH4
L	CH1
ANALOG		CH2	CH3	CH4
R	CH1
(Illustrated example)

●L channel of the [AUDIO MONITOR] connectors and headphones: Output mixed audio of the first, second and fourth channels.

●R channel of the [AUDIO MONITOR] connectors and headphones: Output the

audio from the third channel.

●Recording level adjustment in the Standby mode is possible in the EE mode.

●During recording or audio level adjustment, audio can be monitored via the rear panel [AUDIO MONITOR] connectors or the front panel [PHONES] jack. For monitor output, refer to page 70.

●When menu switch No. 215

[AUD REC VOLUME MODE1] is set to “MAS-1 BAL-2/MAS-3 BAL-4”, the master level adjust and balance adjust functions assigned to each volume control are enabled even if the corresponding channel is in the Unity mode.

●The audio reference level can be set with menu switch No. 257 <AUD REF. SIGNAL LEV.> (-20 dB or -18 dB).

●The recording level of this unit can be adjusted either fixedly or manually.

To adjust the recording level, pull out the [REC] volume controls to engage the Manual mode and push in them to engage the Fixed (Unity) mode.

Either mode can be selected independently for each audio channel.

Fixed recording level adjustment

Push in the [REC] volume controls to engage the Unity mode for recording level adjustment.

●In the Unity mode, the [R] indicator on the upper section of the meter lights. This means that adjustment is not possible with the [REC] volume controls.

Manual recording level adjustment

●Pull out the [REC] volume controls to engage the Manual mode for recording level adjustment.

In the Manual mode, the [R] indicator on the upper section of the meter goes out.

1There are two ways to adjust recording levels manually. Adjust the audio level for each channel independently with the CH1 to CH4

2[REC] volume controls.

Use CH1 and CH2 [REC] volume controls as one pair and CH3 and CH4 [REC] volume controls as one pair. Adjust the audio level with the CH1 and CH3 [REC] volume controls as a master volume control and the CH2 and CH4 [REC] volume controls as a balance control.

Select the adjustment mode with menu switch No. 215 <AUD REC VOLUME MODE 1>.

Menu switch setting

●Select the manual recording level adjustment mode with menu switch No. 215 <AUD REC VOLUME MODE 1>.

“CH1/CH2/CH3/CH4 (0)”: To independently adjust the recording level for each channel with CH1 to CH4 [REC] volume controls. “MAS-1 BAL-2/,MAS-3 BAL-4 (1)”: Use CH1 and CH3 [REC] volume controls for master volume control and the CH2 and CH4 [REC] volume controls for balance control.

70 71