JVC BR-D95U B6 Rev Shuttle Key, C0 Auto Edit Key, Executes Auto Edit on the VCR, C4 Full EE On

13 RS-232C protocol
13-2 RS-232C Commands
B5: Fwd Shuttle Key							Basic/JVC-1 Table
Shuttle search playback in the forward direction.
•	Specify the Fwd Shuttle Mode. The speed is
	specified by the second byte.
•	Specify the adjustment speed.
	TxD	B5		3*
	RxD		0A		0A
•	The second TxD byte consists of numeric data
	and is expressed with “30”, “31”, “32” ... “38”,
	“39”, “3A”, “3B” and “3C”.
•	When invalid data is received, the VCR returns
	“02: Error”.
•	The speeds corresponding to each value are
	shown below.
	Data	30		31	32	33	34	35	36	37	38
	Speed		Still 0.03 0.09 0.20 0.50					1	2	4	6
			39	3A
		10		17 or 32
	Data					3B		3C
	Adjustment speed					-10% +10%
Auxiliary commands

•[56: Clear] is valid for the second TxD byte or later. All commands back to the first byte are cleared.

•When [02: Error] occurs, [41: ClearError] is valid. The previous command (one byte) is cleared.

[40: Enter] has no effect.

B6: Rev Shuttle Key			Basic/JVC-1 Table
Shuttle search playback in the reverse direction.
Specify the Fwd Shuttle Mode. The speed is
specified by the second byte.
Specify the adjustment speed.
TxD	B6	3*
RxD		0A	0A

•The second TxD byte consists of numeric data and is expressed with “30”, “31”, “32” ... “38”, “39”, “3A”, “3B” and “3C”.

•When invalid data is received, the VCR returns “02: Error”.

•The speeds corresponding to each value are shown below.

C0: Auto Edit Key	Basic Table
Executes Auto Edit on the VCR.

•The editing channel must be selected with [E5/ E9: Edit Preset].

•Use with [FA: Rec Request].

• Set the preroll time with [E6: Preroll Time Preset].

•When preroll time is not specified, the VCR’s menu setting is used.

•The VCR returns [01: Complete] after Auto Edit is complete.

[0B: NAK] is returned to the player.

TxD	FA	C0
RxD	0A	0A	01
C1: Preview Key			Basic Table
Execute Preview on the VCR.

•The editing channel must be selected with [E5/ E9: Edit Preset].

•Use with [FA: Rec Request].

• Set the preroll time with [E6: Preroll Time Preset].

•When preroll time is not specified, the VCR’s menu setting is used.

•The VCR returns [01: Complete] after Preview is complete.

[0B: NAK] is returned to the player.

TxD	FA		C1
RxD		0A	0A	01
C2: Review Key				Basic Table
Execute Review on the VCR.

•[C0: Auto Edit] must be complete.

•Set the preroll time with [E6: Preroll Time Preset].

•When preroll time is not specified, the VCR’s menu setting is used.

•The VCR returns [01: Complete] after Review is complete.

[0B: NAK] is returned to the player.

TxD	C2
RxD	0A	01

C4: Full EE On		Basic/JVC-1 Table
Checks VCR’s input signals.
TxD	C4
RxD		0A
The VCR returns [0B: NAK] to the player.
C5: EE Off		Basic/JVC-1 Table

13 RS-232C protocol
13-2 RS-232C Commands
CA: Rec Key				Basic/JVC-1 Table
Recording
Use with [FA: Rec Request].
TxD	FA	CA
RxD	0A		0A
The VCR returns [0B: NAK] to the player.
CB: Rec Pause Key				Basic/JVC-1 Table
Recording is paused.
Use with [FA: Rec Request].
TxD	FA	CB
RxD	0A		0A
The VCR returns [0B: NAK] to the player.
CE: Edit On Key				Basic Table
The channel selected with [E5: Edit Preset] is
engaged in the Edit mode.
Use with [FA: Rec Request].
TxD	FA	CE
RxD	0A		0A
The VCR returns [0B: NAK] to the player.
CF: Edit Off Key				Basic Table
Stops the editing operation.
The VCR enters the Play mode after editing is
complete.
TxD	CF
RxD	0A
The VCR returns [0B: NAK] to the player.
D1: Device Type Request				JVC-1 Table
Returns the model name of the connected VCR.
TxD	D1
RxD	**	**	**	**

•Uses ASCII code to express “0” to “9”, “a” to “z”, and “space”.

•For example, d = “64”, 9 = “39”, 5 = “35” and space = “20” for the BR-D95.

D3: Memory SwitchSense			JVC-1 Table
Recalls menu switch content.
TxD	D3	**
RxD	0A	**	**

•Refer to “Menu Switch setting” to find out more about menu switch contents.

•Specify the address data you want to recall with the second TxD byte.

The corresponding addresses are as follows.

31: Audio-7 information	80: TimeCode-1 information
81: TimeCode-2 information	79: TimeCode-3 information
77: TimeCode-4 information	78: TimeCode-5 information
82: OnScreen-1 information	83: OnScreen-2 information
84: TBC information-1	86: TBC information-3

•The third and fourth RxD bytes express indi- vidual bit information (Data1/Data2) for the specified address.

•When invalid data is received, the VCR returns “02: Error”.

Auxiliary commands

•When [02: Error] occurs, [56: Clear] is valid. All commands back to the first TxD byte are cleared.

•When [02: Error] occurs, [41: ClearError] is valid. The previous command (one byte) is cleared.

•[40: Enter] is invalid.

D4: Tape Remain Sense					JVC-1 Table
Recalls remaining tape time information.
TxD	D4
RxD		3*		3*	3*
		1H		10M	1M
D6: Preroll Time Sense					Basic Table
Shows the preroll time setting.
The VCR returns the value set by [E6: Preroll Time
Preset] or the value set with the VCR’s menu.
TxD	D6
RxD		3*		3*
		10S		1S
D7: Status Sense					Basic/JVC-1 Table
Shows the VCR status.
TxD	D7
RxD	**	**	**	**	**

•For an explanation of the meaning of each bit, refer to “Sense command details”.

D8: Current TC Sense				Basic/JVC-1 Table
Shows the current TC time data.
TxD	D8
RxD		3*	3*	3*	3*
		10H	1H	10M	1M
	3*	3*	3*	3*
	10S	1S	10F	1F

• Values after the first RxD byte from 0 to 9 are

Data	30	31	32	33	34	35	36	37	38
Speed	Still	0.03 0.09 0.20			0.50	1	2	4	6
	39	3A
	10	17 or 32
Auxiliary commands

•[56: Clear] is valid for the second TxD byte or later. All commands back to the first byte are cleared.

•When [02: Error] occurs, [41: ClearError] is valid. The previous command (one byte) is cleared.

•[40: Enter] has no effect.

Releases EE check.
TxD	C5
RxD	0A
C8: Select EE On		Basic Table
Checks the input signals to the editing channel
selected by [E5/E9: Edit Preset].
TxD	C8
RxD	0A
The VCR returns [0B: NAK] to the player.
C9: EE Off		Basic Table
Releases EE check.
TxD	C9
RxD	0A

01	:Servo/System-1 information
10	:System-3 information
40	:System-5 information
89	:System-7 information
87	:System-9 information
91	:System-11 information
94	:System-14 information
0a	:Video information-2
0c	:Video information-4
1b	:Video-6 information
1e	:Video-8 information
0f	:Video-10 information
1d	:Video-12 information
06	:Audio-3 information
03	:Audio-5 information

08	:System-2 information
20	:System-4 information
88	:System-6 information
90	:System-8 information
09	:System-10 information
92	:System-12 information
0b	:Video information-3
0d	:Video-5 information
0e	:Video-7 information
1c	:Video-9 information
1f	:Video-11 information
05	:Audio-2 information
07	:Audio-4 information
30	:Audio-6 information

expressed in ASCII code.

D9: Current CTL Sense				Basic/JVC-1 Table
Shows the current CTL time data.
TxD	D9
RxD		3*	3*	3*	3*
		10H	1H	10M	1M
	3*	3*	3*	3*
	10S	1S	10F	1F

•Values after the first RxD byte from 0 to 9 are expressed in ASCII code.

•The most significant bit at 10H expresses

“minus”.

128 129