JVC BR-D95U specifications ON-SCREEN Display

2 CONTROLS, CONNECTORS AND DISPLAYS

2-4 COUNTER DISPLAY

Indicator section

2 CONTROLS, CONNECTORS AND DISPLAYS

2-5 ON-SCREEN DISPLAY

CTL TC UB DF SERVO CF GEN 16:9 AP			525		CONDITION
AUTO OFF P.READ V.VAR PB/EE REMOTE			625
	H	M		S			[VCON] button
						F

Video/audio control display

*For adjustment of each item, refer to ÒVideo control adjustmentÓ on page 118.

1. Tape counter display, etc.

On-screen display

On-screen information is available only via the rear panel [LINE 2 - SUPER OUT] connector.

1. Tape counter display

● Shows data when the [ON SCREEN] switch on

	Indication	Meaning when lit
CTL		The CTL counter is shown.
TC		The time code is shown.
UB		The user bits are shown.
DF		The CTL counter or time code is in the
		drop-frame mode. (525)
SERVO		Servo is stable.
CF		The color frame servo is set. This
		indication lights during recording. When
		the [CF] switch is ON and a tape with color
		frame information is played back, this
		indication also lights.
		When the PLAYER is selected during
		SWAP editing, the [CF] indication does not
		light.
GEN		Signals are input to the [REF] connector.
(Blinking) GEN		The input digital audio signals cannot be
		recorded correctly because no external
		sync signal is input.
16:9		Wide aspect ID signal is being played back.
AP		A non-D-9 tape is played back.
AUTO OFF		A malfunction or abnormality has occurred.
P. READ		The VCR is in the Pre-read mode.
V. VAR		The video parameters can be adjusted.
PB/EE		The PB/EE Auto Switching mode is
		selected.
PB		The PB mode is selected.
REMOTE		The VCR is in the Remote mode.
CONDITION
		Channel condition is normal.
		Minor errors.
		Major errors. Normal playback is not
		possible.
(Blinking)		Tracking is not correct.
Video signal system
4	525	The NTSC signal system is set.
4	625	The PAL signal system is set.
The video signal system can be set with menu switch No. D95

The following error messages may be
displayed during swap editing.
Indication	Meaning
Local	The playerÕs Local/
	Remote is set to ÒLocalÓ.
No Tape	No cassette is loaded in
	the VCR.
Bump Error	Bump error occurs.
No Edit Cmd	The edit mode is not
	selected.
Dur = 0	Duration is set to 0.
Servo Error	Servo error occurs.
Split No A.	The audio insert mode is
	not selected.
Rec Inh	Recording is not possible
	on this cassette.
IN/OUT Rev	The IN and OUT points
	are reversed in terms of
	the timeline.
Over 300%	Tape speed is more than
	3x.
Over -200%	Reverse tape speed is
	more than -2x.
VTR No Play	The VCR will not
	function.During editing,
	the VCR stops.
AuCondition	Editing was interrupted
	because of audio
	conditions deteriorated.
NO CTL	Stops the operation when
	insert editing is executed
	in a non-recorded
	section.
● Press the [STOP] button to release
error display indications.
● ÒNo TapeÓ indication goes out when a
cassette tape is loaded.

			PLAY
		R: TCR 00:00:00:01
Player/recorder		TC read-out mode
indication
	Menu switch No. 504 <INFORMATION SELECT>
		SUB read-out mode
			STOP		Operation mode
	SUB TCR 00:00:00:00				Sub time code
		TCR 00:00:00:00			Counter
		Counter mode
Counter mode
CTL	: CTL data
TCR	: Time code reader data
TC1	: Time code reader data (when the first field is played back)*
TC2	: Time code reader data (when the second field is played
	back)*
TCR¥ : CTL interpolation mode
TCG	: Time code generator data
UBR	: User bits reader data
UBG	: User bits generator data
LTC	: LTC data
* Shown when the tape speed is less than ±0.3x.
Player/recorder indication
When the editing screen display is not shown during swap editing,
this indicates which VCR's data is currently displayed on the tape
counter.
P:When the player is selected (SUBTC is not shown)
R:When the recorder or both the recorder and player are selected.
Drop-frame display (NTSC only)
In recording or playback in the Drop-frame
mode, the counter display is as shown below.
	TCR 00:00:00á00
		Drop frame indication
2. Menu setting display			3. Hour meter data display
002:OPERATION LOCK				DH:DRUM HOUR		METER
		OFF
003:SYNC SELECT						0002
		AUTO
005:AUTO TRACKING
		ON
008:CAP LOCK(525)		SW SEL
009:CAP RE-LOCKING DIR.
	ACCELERATION

the sub panel is set to ON.

● You can choose what information is shown with

menu switch No. 504 <INFORMATION

SELECT>.

Only time data is displayed when ÒTIME (0)Ó is

selected.

Both time data and VCR operation mode are

displayed when ÒTIME & MODE (1)Ó is selected.

● The display position can be shifted horizontally

with menu switch No. 501 <CHARA

H.POSITION> and vertically with No. 502

<CHARA V.POSITION>.

● Set the [ON SCREEN] switch on the sub panel

to OFF to turn off the on-screen display.

* If menu switch No. 513 <EDIT ON SCREEN>

is set to ÒONÓ, you cannot turn the on-screen

display off.

● When menu switch No. 504 <INFORMATION

SELECT> is set to ÒTIME + SUB TCÓ or ÒTIME +

SUB TC + MODEÓ, sub time code information is

shown simultaneously on a different line.

2. Menu switch setting display

Press the [MENU] button to call up the menu

setting display on screen.

● Select a menu item by turning the jog dial. For

details, refer to ÒMenu switch settingÓ on

page 31.

● Pressing the [MENU] button restores the normal

display.

3. Hour meter data display

Hour meter data can be displayed in the Menu

Switch Setting mode. For details, refer to ÒHour

meter data displayÓ on page 39.

4. Warning code display

If a malfunction occurs, the corresponding warning

code is automatically displayed.

For details, refer to ÒWarnings with IndicatorsÓ on

page 145.

5. Tape remaining time display

When menu switch No. 505 <REMAIN ENABLE>

is set to ÒENABLE(1)Ó, tape remaining time is

shown in 6 steps.

<525/625> (on the top menu).	After selecting the video signal
system, turn this unit OFF then ON again to switch to the
selected video signal system.

*During swap editing, player information is shown only by the

indicators in the section when the player is selected. The [AUTO OFF] indicator always shows recorder information.

4. Warning display	5. Tape remaining time display
WARNING 02 1
CONDENSATION ON DRUM
	E		F	PLAY
		CTL		0:00:00:00

E     F
E   	F
E  	F
E 	F
E  (blinking)F
E (blinking)	F
No indication

Remaining time of 15 minutes or more Remaining time of less than 15 minutes Remaining time of less than10 minutes Remaining time of less than 5 minutes Remaining time of less than 2 minutes Remaining time of less than 1 minutes The remaining time is being calculated.

22 23