Marmitek 1082002 Description Of Controls & Operation, Front View Monitor Unit, Time Control Knob

DESCRIPTION OF CONTROLS & OPERATION

FRONT VIEW MONITOR UNIT

1. TIME CONTROL KNOB

To vary the display switching speed from 3 to 60 seconds. When the system is in the auto mode with more than one camera, this knob enables you to vary the time each camera picture will be dis- played on the monitor. In order to increase the switching time, turn this knob in clockwise direction. Turning this knob all the way in counter clockwise direction will quickly step through the camera images.

12

TALK 1 2 3 4 AUTO POWER

PUSH

7 11 8 9 10

			6
			5
1	2	3	4

2. VOLUME CONTROL KNOB

Adjust the volume control knob to reach the desired volume level.

3. CONTRAST CONTROL KNOB

To adjust the CONTRAST of the screen.

4.BRIGHTNESS CONTROL KNOB To adjust the BRIGHTNESS of the screen.

5.VERTICAL HOLD CONTROL KNOB To adjust the VERTICAL synchronization.

6.VCR ON/OFF SELECTOR

Press it to review the video signal from the VCR.

Press it again to switch back to the camera signal.

VCR Recording Reviewing Method

1)Connect the monitor to the VCR and press the RECORD button on the VCR to start recording the pictures. The VCR will record the

OBSERVER25 3