Marmitek 1082002 owner manual Installation Of The Monitor, Audio/Video Jack Connections

INSTALLATION OF THE MONITOR

1-4 Camera connections

Using the provided plug&play cable, connect the camera to the monitor as shown in the diagram on the next page.

Plug the AC cord into an 230V outlet

Power the monitor by pressing the green power button

1.Camera 1 Terminal

Connect camera 1 cable to this terminal

2.Camera 2 Terminal

Connect camera 2 cable to this terminal.

3.Camera 3 Terminal

Connect camera 3 cable to this terminal.

4.Camera 4 Terminal

Connect camera 4 cable to this terminal.

AUDIO/VIDEO JACK CONNECTIONS.

Refer to the following connection method, for connecting a VCR or time lapse recorder

Monitor	VCR Terminal
Video OUT	Video IN
Audio OUT	Audio IN
Video IN	Video OUT
Audio IN	Audio OUT

NOTE : The cable for this connection is not supplied with the unit. An "RCA" type cable is required.

C1 C2 C3 C4

1 2 3 4

AC power cord

8 MARMITEK