Usage of the MicroModules in a 3 phase installation.
The X10 transmitters of the MicroModules transmit the command only once for use in the phase of which they are connected. When you want to receive the commands on your other phases as well, you will need to install the CAT3000 phase coupler/repeater.
Technical specifications
Power | 230V, 50Hz |
Supply current | < 30 mA capacitive |
Appliance module | 16 A |
Signal transmission | > 5Vpp in 5Ohm at 120 kHz ±1 kHz |
| according to |
| |
X10 transmission | 1 pulse burst at 0° and 180° |
Signal sensitivity | 25mVpp … 6Vpp at 120 kHz ± 4kHz |
Signal to Noise ratio | 1,35 : 1 |
Connections | up to 2,5 mm2 |
Approvals | |
| |
Made in Holland |
|
10 | MARMITEK |
