Marmitek Marmitek MicroModule AWM2, appliance module Applications, Functions, MICROMODULE AWM2

Marmitek MicroModule AWM2

Marmitek X10 transmitter for 2 addresses with a built-in

appliance module.

Applications

•The MicroModule can be installed behind conventional wall switches or into wall outlets because of the extreme small size of the MicroModule (minimum built-in depth 40 mm, advised 50 mm). The MicroModule is also ideal for installation into light fixtures, home appliances or for use in areas with limited space such as lowered ceilings.

•Universal compatibility: No limitation in choosing brand, color or type of any wall switches and outlets.

•The MicroModule can be used in combination with regular switches or pulse switches. These will be automatically recognized by the AWM2.

•Install two-way switches without adding additional wires in between wall switches (the MicroModules transmit their status to the other MicroModuls through the power line).

•Execute Macro’s and preferred scenarios of a conventional switch (e.g. along with Marmitek ActiveHome).

Functions

•X10 Transmitter for 2 Marmitek X10 addresses and the commands ON and OFF.

•Built-in appliance module (16A).

•Two way Marmitek X10 communication.

•Two wall switches can be connected with one AWM2. One serves the internal appliance module and also gives the X10 command through the power line. The second wall switch is used to transmit a second X10 address using the commands ON/OFF.

•Every Marmitek X10 controller can be used to program the Marmitek X10 address through the power line (e.g. a Marmitek Remote Control or the CM11 Computer interface).

•One free programmable Marmitek X10 address A1 to P16 (base address). The second address programs automatically and will always be the next Marmitek X10 address following on the

MICROMODULE AWM2 3