6MARMITEK
3 Installing the batteries
1. Open the cover on the back of the ET35
2. Insert 4 batteries (AAA size alkaline). Make sure the batteries are the same brand and
are NEW and observe polarities indicated inside the battery compartment.
3. All the user programmed parameters will be retained indefinitely during battery
replacement
4. Remove the plastic protection foil from the Touchscreen.
4 Description of the ET35 "rubber" keys
The Active Source Indicator
Every time a button on the touchscreen is pressed, the EasyTouch 35 will indicate which
mode is active at that moment. This Active Source Indicator enables you to see which
mode the remote control is set to at that time.
You do not have to change to the relevant mode in order to operate the volume and
Mute buttons directly from the VCR, DVD or SAT mode. These devices do not have any
volume control themselves and the EasyTouch 35 is programmed to automatically switch
from, for example, VCR mode to TV mode. The LED also changes from VCR, DVD or SAT
mode to TV mode and back again.
1: LED: Turns on whenever a rubber key or a Touchscreen key is pressed and indicates
when commands are being transmitted.
2: TV, VCR, CD, SAT, CBL, DVD, AUDIO, Marmitek X-10 Home Automation
mode:
To select the appliance you wish to control.
The Marmitek X-10 Home Control key allows you to control any lights or
appliances connected to Home Control (Marmitek X10) modules or to program
and control any kind of device such as a TV, satellite receiver, video recorder or DVD
player. By default this key is pre-programmed to control home control modules.
3: POWER: to switch off the last selected appliance
mode: Turns All Lights on.
4: VOL + / -: to control the volume
mode: brightens and dims the selected Home Control Module.
5: MACRO: to launch a macro (see chapter 10)
6: SET UP: to set the remote control for the appliance you wish to control. Allows the
access to secondary functions:
• Press and release the Setup key (A letter S appears on the top right hand
corner of the Touchscreen)
• Press the desired secondary function key (the "S" is turned off).
7: MUTE: to turn on and off the sound
mode: turns All Home Control modules off.
8: CHAN +/-: to select the next or the previous channel
mode: turns on or off the selected home automation module.