Marshall electronic V-R201P-AFHD Rear Panel Features, Video Configuration Submenu, Mounting Holes

Rear Panel Features

4

Rear Panel

1	3	2
1 Power Input		3 Tally

On-Screen Menu (continued)

VIDEO CONFIGURATION SUBMENU

Video Configuration Submenu

■Color Temperature Presets

Use this setting to choose one of three color temperature presets:

•D55 (5500K)

•D65 (6500K)

•D93 (9300K)

•USER (Adjustable Color Bias and Gain)

■Adjusting Color Bias

Connect the 24VDC input to the 4-Pin XLR power input connector. Power can be supplied from the included power supply, or from a variety of DC sources supplying at least 3 Amps at 24 Volts.

IMPORTANT: If using a power source other than the included power supply, be sure that the polarity of the DC input is correct:

Pin 1: GND

Pin 2: N/C

Pin 3: N/C

Pin 4: +24VDC

2Signal Input/Output

Connections:

•Composite Video Input/Output (BNC)

•S-Video Input/Output (4-Pin Mini-DIN)

•YPBPR Input/Output (BNC x 3)

•SDI Input/Output (BNC)

•VGA (HD-15)

•DVI (29-Pin connector, DVI-D signals only)

All outputs are active and require the monitor to be powered.

Each tally light is activated via the HD-15 connector by connecting the corresponding pin to ground. A variety of external devices can be used to perform the contact closure. No additional power should be supplied to the HD-15 port.

Tally Interface: HD-15 Pinout

Pin No.	Signal
1	Green
2	Red
3	Yellow
4	Ground
5	Ground
6	N/C
7	N/C
8	N/C
9	N/C
10	N/C
11	N/C
12	N/C
13	N/C
14	Ground
15	Ground

4Mounting Holes

A VESA-standard 75 mm hole pattern is provided to accommodate a variety of custom mounting options.

Color Bias Menu

Use this submenu to adjust bias of the color response. Adjust the bias for each color to alter the white balance of the image. The Color Temperature preset will automatically switch to USER when Color Bias settings are adjusted. It is normal for color bias adjustments to be very subtle.

■Adjusting Color Gain

Color Gain Menu

Use this submenu to adjust gain of the color response. The Color Temperature preset will automatically switch to USER when Color Gain settings are adjusted.

6 11